OPNsense Forum

Archive => 17.1 Legacy Series => Topic started by: bulmaro on March 08, 2017, 08:26:26 pm

Title: [SOLVED] Error fatal trap
Post by: bulmaro on March 08, 2017, 08:26:26 pm

Hello everyone
Can someone have any idea about this error message from the attached image?
It is three times that I get this message, until I must enter the reboot command to start normamal.

Reviewing the message log
NetFlow is not working for me

   flowd_aggregate.py: flowd aggregate died with message Traceback (most recent call last): File "/usr/local/opnsense/scripts/netflow/flowd_aggregate.py", line 148, in run aggregate_flowd(do_vacuum) File "/usr/local/opnsense/scripts/netflow/flowd_aggregate.py", line 85, in aggregate_flowd stream_agg_object.cleanup(do_vacuum) File "/usr/local/opnsense/scripts/netflow/lib/aggregate.py", line 281, in cleanup self._update_cur.execute('vacuum') DatabaseError: database disk image is malformed


Thanks for your attention

Title: Re: Error fatal trap
Post by: franco on March 09, 2017, 07:43:18 am

Hi bulmaro,

The crash is from Intrusion Detection IPS mode, not much that can be done here inside the kernel. You can certainly work around this by disabling IPS mode if the crash recurs.

The Flowd error from a corrupted database likely because of the former crash. Reset your flowd database or enable periodic backups under System: Settings: Misc.


Cheers
Franco

Title: Re: Error fatal trap
Post by: bulmaro on March 09, 2017, 08:25:41 pm

Thank you very much, problem solved