OPNsense Forum

Archive => 17.1 Legacy Series => Topic started by: roro on February 11, 2017, 03:49:03 am

Title: APU2C4 with OPNsense-17.1-OpenSSL-serial-amd64.img
Post by: roro on February 11, 2017, 03:49:03 am
A long story in a few lines.

Installing by USB. Tried multiple different USB sticks. No succes. CAM-status errors for the usbstick.

Updated pcengines bios via tinycore (you need FAT instead of FAT32 on usb) otherwise mounting won't work (MORE LOST HOURS).

After more then a day I came with the idea. Lets put serial-img on SDcard instead of USB stick.
For me that was the trick.

I have a msata in the apu2c4.
Now I could boot from SDcard and I finally installed OPNsense via Installer user on the Msata disk.

Hope others benefit from this.

Gutnite.

Is there something wrong with the USB stick (/etc/fstab settings in OPNsense-17)?
Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]...
Mounting filesystems...
tunefs: soft updates set
(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 00 00 10 00 00 10 00
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command
(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 00 00 10 00 00 10 00
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command
Title: Re: APU2C4 with OPNsense-17.1-OpenSSL-serial-amd64.img
Post by: kraileth on May 20, 2017, 08:26:58 am
Thanks roro for your post!

I've run into the same issue. After finally getting hardware (APU2C4)  to move OPNsense from the "play around" type of VM that I had it in to a production setting, I failed with the error described above. I don't have an SD card to try the suggested solution. But in general I think it would make sense to investigate and fix this. Since my APU is not running as I want it just yet, it's available for tinkering. Time is not extremely critical and so I volunteer to test things and provide more info if any developer wants to look into this.

The problem is definitely OPNsense specific - I was able to install pfSense without any problems. First I thought that it might be a weird issue with FreeBSD 11 but pfSense 2.4BETA can be installed as well without hitting this. My system is currently working but I would prefer to have OPNsense on there (I like LibreSSL, collaboration with HardednedBSD, etc. and think that the way some pfSense people agitate against OPNsense is disgusting and childish which is why I'd rather become part of this community). So I'd gladly delete the current OS and give any proposed fix a try. I'm familiar with FreeBSD (as a user, though, not as a developer!) and am not afraid of compiling code or something.

Here's some more information, hoping that it might be helpful. Attaching the serial console and booting OPNsense 17.1 from USB:

Code: [Select]
# cu -l /dev/cuaU0 -s 115200                             
Connected                                                                                 
PCEngines apu2                                                           
coreboot build 20170228                             
4080 MB ECC DRAM                                         
                                                                         
SeaBIOS (version rel-1.10.0.1)                   
                                                                           
Press F10 key now for boot menu                                           
                                                 
Select boot device:                                       
C o n s o l e s :   i n t e r n a l   v i d e o / k e y b o a r d     s e r i a l   p o r t
 . USB MSC Drive  USB DISK 2.0 PMAP             
B I O S   d r i v e   C :   i s   d i s k 0 0iBytes)                                         
 . Payload [memtest]                                                     
B I O S   d r i v e   D :   i s   d i s k 1 1                       
                                               
B I O S   6 3 8 k B / 3 6 6 8 6 6 0 k B   a v a i l a b l e   m e m o r y y   
 /bboooott//ccoonnffiigg::  --SS111155220000  --DD                       
                                                                                                                           
 |                                                                                                           
F r e e B S D / x 8 6   b o o t s t r a p   l o a d e r ,   R e v i s i o n   1 . 1 1
                                                               
( r o o t @ s e n s e y 6 4 ,   S u n   M a r   2 6   1 5 : 2 0 : 4 1   C E S T   2 0 1 7 ) )
                                                               
LLo a d i n g   / b o o t / d e f a u l t s / l o a d e r . c o n f f
                                                                             
/|\                                                                         
                                                                                                 
                  ______  _____  _____                                       
                 /  __  |/ ___ |/ __  |                                     
                 | |  | | |__/ | |  | |___  ___ _ __  ___  ___               
                 | |  | |  ___/| |  | / __|/ _ \ '_ \/ __|/ _ \             
                 | |__| | |    | |  | \__ \  __/ | | \__ \  __/             
                 |_____/|_|    |_| /__|___/\___|_| |_|___/\___|             
                                                                             
 +=========================================+     @@@@@@@@@@@@@@@@@@@@@@@@@@@@
 |                                         |   @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 |  1. Boot Multi User [Enter]             |   @@@@@                    @@@@@                     
 |  2. Boot [S]ingle User                  |       @@@@@            @@@@@   
 |  3. [Esc]ape to loader prompt           |    @@@@@@@@@@@       @@@@@@@@@@@
 |  4. Reboot                              |         \\\\\         /////     
 |                                         |   ))))))))))))       (((((((((((
 |  Options:                               |         /////         \\\\\     
 |  5. [K]ernel: kernel (1 of 2)           |    @@@@@@@@@@@       @@@@@@@@@@@
 |  6. Configure Boot [O]ptions...         |       @@@@@            @@@@@   
 |                                         |   @@@@@                    @@@@@
 |                                         |   @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
 |                                         |   @@@@@@@@@@@@@@@@@@@@@@@@@@@@ 
 +=========================================+                             
                                                  17.1  ``Eclectic Eagle''
                                                                     
/boot/kernel/kernel text=0x164e4a0 data=0x13f218+0x4c5ee8 syms=[0x8+0x170d00+0x8+0x188c92]
/boot/entropy size=0x1000                                               
/boot/kernel/if_gre.ko size 0x6058 at 0x234e000             
/boot/kernel/if_tap.ko size 0x75a8 at 0x2355000                                 
/boot/kernel/pf.ko size 0x51298 at 0x235d000   
/boot/kernel/carp.ko size 0xe778 at 0x23af000                                   
/boot/kernel/if_bridge.ko size 0xe1e0 at 0x23be000
loading required module 'bridgestp'
/boot/kernel/bridgestp.ko size 0x6e40 at 0x23cd000
/boot/kernel/if_lagg.ko size 0x11078 at 0x23d4000
/boot/kernel/ng_UI.ko size 0x1638 at 0x23e6000
loading required module 'netgraph'
/boot/kernel/netgraph.ko size 0x160f8 at 0x23e8000
/boot/kernel/ng_async.ko size 0x3718 at 0x23ff000
/boot/kernel/ng_bpf.ko size 0x46b0 at 0x2403000
/boot/kernel/ng_bridge.ko size 0x4f30 at 0x2408000
/boot/kernel/ng_cisco.ko size 0x2ea0 at 0x240d000
/boot/kernel/ng_echo.ko size 0xf20 at 0x2410000
/boot/kernel/ng_eiface.ko size 0x33b0 at 0x2411000
/boot/kernel/ng_ether.ko size 0x46f8 at 0x2415000
/boot/kernel/ng_frame_relay.ko size 0x1d90 at 0x241a000
/boot/kernel/ng_hole.ko size 0x17e8 at 0x241c000
/boot/kernel/ng_iface.ko size 0x3988 at 0x241e000
/boot/kernel/ng_ksocket.ko size 0x6168 at 0x2422000
/boot/kernel/ng_l2tp.ko size 0x6648 at 0x2429000
/boot/kernel/ng_lmi.ko size 0x4000 at 0x2430000
/boot/kernel/ng_mppc.ko size 0x5ca8 at 0x2434000
loading required module 'rc4'
/boot/kernel/rc4.ko size 0xb38 at 0x243a000
/boot/kernel/ng_one2many.ko size 0x2ac8 at 0x243b000
/boot/kernel/ng_ppp.ko size 0x95c0 at 0x243e000
/boot/kernel/ng_pppoe.ko size 0x7548 at 0x2448000
/boot/kernel/ng_pptpgre.ko size 0x47a0 at 0x2450000
/boot/kernel/ng_rfc1490.ko size 0x25a0 at 0x2455000
/boot/kernel/ng_socket.ko size 0x60e8 at 0x2458000
/boot/kernel/ng_tee.ko size 0x21a0 at 0x245f000
/boot/kernel/ng_tty.ko size 0x2e98 at 0x2462000
/boot/kernel/ng_vjc.ko size 0x4498 at 0x2465000
/boot/kernel/ng_vlan.ko size 0x2fc0 at 0x246a000
/boot/kernel/if_enc.ko size 0x30a8 at 0x246d000
/boot/kernel/pflog.ko size 0x28d0 at 0x2471000
/boot/kernel/pfsync.ko size 0xcfe0 at 0x2474000
/boot/kernel/ng_car.ko size 0x33b0 at 0x2481000
/boot/kernel/ng_deflate.ko size 0x3718 at 0x2485000
/boot/kernel/ng_pipe.ko size 0x4f18 at 0x2489000
/boot/kernel/ng_pred1.ko size 0x3400 at 0x248e000
/boot/kernel/ng_tcpmss.ko size 0x2048 at 0x2492000
Booting...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p8 #0 e84bb9532(stable/17.1): Sun Mar 26 15:34:40 CEST 2017
    root@sensey64:/usr/obj/usr/src/sys/SMP amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
VT(vga): resolution 640x480
[HBSD ASLR] status: opt-out
[HBSD ASLR] mmap: 30 bit
[HBSD ASLR] exec base: 30 bit
[HBSD ASLR] stack: 42 bit
[HBSD ASLR] vdso: 28 bit
[HBSD ASLR] map32bit: 18 bit
[HBSD ASLR] disallow MAP_32BIT mode mmap: opt-out
[HBSD ASLR (compat)] status: opt-out
[HBSD ASLR (compat)] mmap: 14 bit
[HBSD ASLR (compat)] exec base: 14 bit
[HBSD ASLR (compat)] stack: 14 bit
[HBSD ASLR (compat)] vdso: 8 bit
[HBSD HARDENING] procfs hardening: enabled
[HBSD LOG] logging to system: enabled
[HBSD LOG] logging to user: disabled
[HBSD SEGVGUARD] status: opt-out
[HBSD SEGVGUARD] expiry: 120 sec
[HBSD SEGVGUARD] suspension: 600 sec
[HBSD SEGVGUARD] maxcrashes: 5
CPU: AMD GX-412TC SOC                                (998.15-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x730f01  Family=0x16  Model=0x30  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCAacpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <ISA Option ROM> at iomem 0xef000-0xeffff on isa0
ppc0: cannot reserve I/O port range
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
nvme cam probe device init
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <0x1022> at usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <AMD> at usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x0438> at usbus1
uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1
ugen0.2: <vendor 0x13fe> at usbus0
umass0: <vendor 0x13fe USB DISK 2.0, class 0/0, rev 2.00/1.00, addr 1> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0xc100
umass0:2:0: Attached to scbus2
uhub2: 4 ports with 4 removable, self powered
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Error 5, Retries exhausted
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SATA SSD SBFM01.0> ACS-4 ATA SATA 3.x device
ada0: Serial Number 99C00773071300080542
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 15272MB (31277232 512 byte sectors)
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 998149249 Hz quality 1000
Trying to mount root from ufs:/dev/ufs/OPNsense_Install [ro,noatime]...
mountroot: waiting for device /dev/ufs/OPNsense_Install...
Mounting from ufs:/dev/ufs/OPNsense_Install failed with error 19.

Loader variables:
  vfs.root.mountfrom=ufs:/dev/ufs/OPNsense_Install
  vfs.root.mountfrom.options=ro,noatime

Manual root filesystem specification:
  <fstype>:<device> [options]
      Mount <device> using filesystem <fstype>
      and with the specified (optional) option list.

    eg. ufs:/dev/da0s1a
        zfs:tank
        cd9660:/dev/cd0 ro
          (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)

  ?               List valid disk boot devices
  .               Yield 1 second (for background tasks)
  <empty line>    Abort manual input

mountroot>
Title: Re: APU2C4 with OPNsense-17.1-OpenSSL-serial-amd64.img
Post by: kraileth on May 20, 2017, 08:28:37 am
And for comparison here's the currently installed pfSense 2.4BETA booting (had to split this off into a new post because it would exceed the length limitation otherwise):

Code: [Select]
# cu -l /dev/cuaU0 -s 115200                         
Connected                                                                             
PCEngines apu2                                                                                 
coreboot build 20170228                                                                                                                                 
4080 MB ECC DRAM                                                                         
                                                                                                   
SeaBIOS (version rel-1.10.0.1)                                               
                                                           
Press F10 key now for boot menu                                                     
                                                                                               
Booting from Hard Disk...                                                 
/boot/config: -S115200 -h                                                             
                                                                                               
Consoles: serial port                                                                                                                                   
BIOS drive C: is disk0                                                                   
BIOS 638kB/3668664kB available memory                                                             
                                                                             
FreeBSD/x86 ZFS enabled bootstrap loader, Revision 1.1
(root@buildbot2.netgate.com, Mon Mar 13 14:24:21 CDT 2017)
Loading /boot/defaults/loader.conf                                   
|                                                                               
          __ ____                                                       
   _ __  / _/ ___|  ___ _ __  ___  ___                                             
  | '_ \| |_\___ \ / _ \ '_ \/ __|/ _ \                     
  | |_) |  _|___) |  __/ | | \__ \  __/                                           
  | .__/|_| |____/ \___|_| |_|___/\___|                                                       
  |_|                                                                                                                                                                 
                                                                       
                                                                             
 +============Welcome to pfSense===========+                             
 |                                         |                 ______                                                         
 |  1. Boot Multi User [Enter]             |                /      \                                         
 |  2. Boot [S]ingle User                  |          _____/    f   \
 |  3. [Esc]ape to loader prompt           |         /     \        /                                                     
 |  4. Reboot                              |        /   p   \______/  Sense
 |                                         |        \       /      \         
 |  Options:                               |         \_____/        \
 |  5. [K]ernel: kernel (1 of 2)           |               \        / 
 |  6. Configure Boot [O]ptions...         |                \______/
 |  7. Select Boot [E]nvironment...        |                                                                               
 |                                         |                       
 |                                         |                 
 +=========================================+                       
                                                                     
                                                                                                                                     
/boot/kernel/kernel text=0x1753bf8 data=0xab8eb8+0x4c8c68 syms=[0x8+0x183bb8+0x8+0x183b31]
/boot/entropy size=0x1000                     
/boot/kernel/zfs.ko size 0x30b000 at 0x2ddf000   
loading required module 'opensolaris'
/boot/kernel/opensolaris.ko size 0xaca8 at 0x30ea000
Booting...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RELEASE-p10 #81 51c8a24f312(RELENG_2_4): Tue May 16 13:17:06 CDT 2017
    root@buildbot2.netgate.com:/builder/ce/tmp/obj/builder/ce/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
VT(vga): resolution 640x480
CPU: AMD GX-412TC SOC                                (998.15-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x730f01  Family=0x16  Model=0x30  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x1d4037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PTSC,PL2I>
  Structured Extended Features=0x8<BMI1>
  XSAVE Features=0x1<XSAVEOPT>
  SVM: NP,NRIP,AFlush,DAssist,NAsids=8
  TSC: P-state invariant, performance statistics
real memory  = 4815060992 (4592 MB)
avail memory = 4070526976 (3881 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <CORE   COREBOOT>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic1: Changing APIC ID to 5
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff806754c0, 0) error 1
random: entropy device external interface
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80675570, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80675620, 0) error 1
wlan: mac acl policy registered
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8069ea50, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8069eb00, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8069ebb0, 0) error 1
kbd0 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8122cb10, 0) error 19
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <CORE COREBOOT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.2 on pci0
pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xfe600000-0xfe61ffff,0xfe620000-0xfe623fff at device 0.0 on pci1
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: 00:0d:b9:45:c8:9c
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
pcib2: <ACPI PCI-PCI bridge> at device 2.3 on pci0
pci2: <ACPI PCI bus> on pcib2
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x2000-0x201f mem 0xfe700000-0xfe71ffff,0xfe720000-0xfe723fff at device 0.0 on pci2
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: 00:0d:b9:45:c8:9d
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
pcib3: <ACPI PCI-PCI bridge> at device 2.4 on pci0
pci3: <ACPI PCI bus> on pcib3
igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x3000-0x301f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe823fff at device 0.0 on pci3
igb2: Using MSIX interrupts with 5 vectors
igb2: Ethernet address: 00:0d:b9:45:c8:9e
igb2: Bound queue 0 to cpu 0
igb2: Bound queue 1 to cpu 1
igb2: Bound queue 2 to cpu 2
igb2: Bound queue 3 to cpu 3
igb2: netmap queues/slots: TX 4/1024, RX 4/1024
pci0: <encrypt/decrypt> at device 8.0 (no driver attached)
xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb22000-0xfeb23fff at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table
usbus0 on xhci0
ahci0: <AMD Hudson-2 AHCI SATA controller> port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xfeb25000-0xfeb253ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb25400-0xfeb254ff at device 19.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
sdhci_pci0: <Generic SD HCI> mem 0xfeb25500-0xfeb255ff at device 20.7 on pci0
sdhci_pci0: 1 slot(s) allocated
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
orm0: <ISA Option ROM> at iomem 0xef000-0xeffff on isa0
ppc0: cannot reserve I/O port range
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
usbus0: 5.0Gbps Super Speed USB v3.0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <0x1022> at usbus0
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <AMD> at usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SATA SSD SBFM01.0> ACS-4 ATA SATA 3.x device
ada0: Serial Number 99C00773071300080542
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 15272MB (31277232 512 byte sectors)
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 998146682 Hz quality 1000
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus1 usbus0
uhub0: 4 ports with 4 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1
ugen1.2: <vendor 0x0438> at usbus1
uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
Configuring crash dumps...
No suitable dump device was found.
Filesystems are clean, continuing...
Mounting filesystems...

     ___
 ___/ f \
/ p \___/ Sense
\___/   \
    \___/

Welcome to pfSense 2.4.0-BETA...

GEOM_ELI: Device ada0p2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI:     Crypto: software
Dump device does not exist.  Savecore not run.
...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/ipsec /usr/local/lib/perl5/5.24/mach/CORE
32-bit compatibility ldconfig path:
done.
External config loader 1.0 is now starting...
Launching the init system....... done.
Initializing.................. done.
Starting device manager (devd)...done.
Loading configuration......done.
Updating configuration...done.
Cleaning backup cache................done.
Setting up extended sysctls...done.
Setting timezone...done.
Configuring loopback interface...done.
Starting syslog...done.
Starting Secure Shell Services...done.
Setting up interfaces microcode...done.
Configuring loopback interface...done.
Creating wireless clone interfaces...done.
Configuring LAGG interfaces...done.
Configuring VLAN interfaces...done.
Configuring QinQ interfaces...done.
Configuring WAN interface...done.
Configuring LAN interface...done.
Configuring CARP settings...done.
Syncing OpenVPN settings...done.
Configuring firewall......done.
Starting PFLOG...done.
Setting up gateway monitors...done.
Starting DNS Resolver...done.
Synchronizing user settings...done.
Starting webConfigurator...done.
Configuring CRON...done.
Starting NTP time client...done.
Starting DHCP service...done.
Starting DHCPv6 service...done.
Configuring firewall......done.
Generating RRD graphs...done.
Starting syslog...done.
Starting CRON... done.
pfSense 2.4.0-BETA amd64 Tue May 16 13:10:27 CDT 2017
Bootup complete