OPNsense Forum

Archive => 17.1 Legacy Series => Topic started by: Nnyan on February 05, 2017, 07:48:05 pm

Title: [SOLVED] 16.7.14 installed but Firmware states "no updates available"
Post by: Nnyan on February 05, 2017, 07:48:05 pm

Hello everyone,

I had this big post about how I had upgraded from 16.7 to 17.1 but OPNSense still showed 16.7 installed on a Jessie minimal installed on ESXi 6.0u2 VM.  But before I posted I had a cup of coffee and ran through the process again and this time properly read the instructions (type "17.1" not just "yes" at the install prompt).

Well it's amazing the results you get when you follow the instructions properly.  16.7.3 upgraded to 17.1 with no issues so far.

Whitebox ESXi 6.0U2 Server
Supermicro MBD-X8DT6-F-ISO18 Motherboard
Dual L5640 CPU
96GB of ECC RAM
4 Cores
4GB RAM (will reprovision with 8GB)
16GB of 40GB SSD space Thin Provisioned
2 E1000 NICS (figuring it out how to change this but it upgraded just fine)

Title: Re: [SOLVED] 16.7.14 installed but Firmware states "no updates available"
Post by: franco on February 05, 2017, 07:56:26 pm

Hi Nnyan,

I've marked this solved as far as I could see. Welcome aboard 17.1. :)


Cheers,
Franco