OPNsense Forum

Archive => 17.1 Legacy Series => Topic started by: strahlenopfer on February 03, 2017, 05:41:43 pm

Title: WiFi: Compex WLE200NX + MultiSSID work like a charme
Post by: strahlenopfer on February 03, 2017, 05:41:43 pm

PC Engine boards and Compex WiFi cards are quite popular for OPNsense installations.
With OPNsense 16.7, the configuration of two SSIDs failed on Compex WLE200NX card (Atheros AR9280 chipset). Even with a single SSID, the WiFi performance was quite poor. 

Thanks to OPNsense 17.1 & Freebsd 11, I successfully configured two SSIDs in AP-mode (WPA2 AES, private use and guests).
The performance is just great.  :)

My platform: PC Engines APU.2C4, Compex WLE200NX, 32GB mSATA.

The upgrade from 16.7 to 17.1 was no problem at all, I also confirm that OpenVPN, Intrusion Detection, transparent HTTP + HTTPS proxy with remote ACLs work as expected.

Cheers,

Strahlenopfer

Title: Re: WiFi: Compex WLE200NX + MultiSSID work like a charme
Post by: Mks on February 05, 2017, 07:16:40 am

Same results here with 3 SSIDs in AP-mode (WPA2, AES)  :)

Title: Re: WiFi: Compex WLE200NX + MultiSSID work like a charme
Post by: tillsense on February 10, 2017, 06:18:56 pm

Hi,

perfect. can you post your settings here?

cheers till

Title: Re: WiFi: Compex WLE200NX + MultiSSID work like a charme
Post by: poupin on February 12, 2017, 08:45:31 pm

Hi,

I'm curious about setting you are using.
Can you post settings or configuration steps here?

Cheers, Martin

Title: Re: WiFi: Compex WLE200NX + MultiSSID work like a charme
Post by: Wayne Train on February 13, 2017, 10:02:40 pm

Yes,
would you please post your Wifi-Interface-Settings ? I'm also very curios about how you managed to do this, since I'm also experiencing poor Performance on WIfi...
Thanks in advance,
Regards
CS

Title: Re: WiFi: Compex WLE200NX + MultiSSID work like a charme
Post by: michkov on February 15, 2017, 06:29:14 pm

i follow, the settings would be are interested for me

thanks

Title: Re: WiFi: Compex WLE200NX + MultiSSID work like a charme
Post by: Wired Life on February 17, 2017, 06:28:47 pm

Can you please make a "netstat -i" and look for Ierrs and Oerrs on the WLE200NX Interface?
I have many of these...