OPNsense Forum

Archive => 17.1 Legacy Series => Topic started by: roro on January 31, 2017, 08:15:06 pm

Title: Upgrade 16.7 to 17.1 succes.
Post by: roro on January 31, 2017, 08:15:06 pm

Thanks OPNsense.
Upgrade succesfull.
Versions    OPNsense 17.1-i386
FreeBSD 11.0-RELEASE-p7
LibreSSL 2.4.4
Updates    Click to check for updates.
CPU Type    Geode(TM) Integrated Processor by AMD PCS (1 cores)

Title: Re: Upgrade 16.7 to 17.1 succes.
Post by: franco on January 31, 2017, 08:53:20 pm

Hi Roro,

Nice to hear, thanks for this. :)


Cheers,
Franco

Title: Re: Upgrade 16.7 to 17.1 succes.
Post by: the_wolf on February 01, 2017, 01:53:26 am

 :D :D :D :D :D ;D ;D ;D ;D

Title: Re: Upgrade 16.7 to 17.1 succes.
Post by: pr3p on February 01, 2017, 11:52:57 am

Quote from: roro on January 31, 2017, 08:15:06 pm

Thanks OPNsense.
Upgrade succesfull.
Versions    OPNsense 17.1-i386
FreeBSD 11.0-RELEASE-p7
LibreSSL 2.4.4
Updates    Click to check for updates.
CPU Type    Geode(TM) Integrated Processor by AMD PCS (1 cores)

Hi roro did you update from 16.7.14_2 to 17.1? on console?

Title: Re: Upgrade 16.7 to 17.1 succes.
Post by: roro on February 01, 2017, 01:19:26 pm

Pr3p,
indeed via console (serial).
Greetings.

Title: Re: Upgrade 16.7 to 17.1 succes.
Post by: chemlud on February 01, 2017, 01:48:49 pm

Wanted to do a fresh install of 17.1 instead of updating from latest stable. However, I can't find a LibreSSL image. Any problems to be expected when loading a config.xml from my LibreSSL install? Possible to switch to LibreSSL after installing?

Title: Re: Upgrade 16.7 to 17.1 succes.
Post by: weust on February 01, 2017, 02:42:06 pm

AFAIK, but I could be wrong, there is only a OpenSSL installation file (ISO/IMG, whatever).
You switch to LibreSSL afterwards.

Importing the config file which has LibreSSL set should work fine.
But in the past, and not sure if that still holds true, you might have to switch to OpenSSL and then to LibreSSL again.
Check the console to see what it says on a boot. You need to reboot after applying the imported config anyway.

Title: Re: Upgrade 16.7 to 17.1 succes.
Post by: franco on February 01, 2017, 07:16:12 pm

What weust said is correct: install OpenSSL, Import config, set firmware to LibreSSL if not already done and perform an update to the LibreSSL packages.

Title: Re: Upgrade 16.7 to 17.1 succes.
Post by: abraxxa on February 01, 2017, 09:40:10 pm

Hi,
I've also upgraded from 16.7.14 to 16.7.14_2 and from that to 17.1 successfully via ssh.
I only had to start the mini ITX pc I run it on after the first reboot because it shut down the box instead of rebooting, but that happened when I used reboot before too, must be an issue with the Gigabyte mainboard.

Title: Re: Upgrade 16.7 to 17.1 succes.
Post by: cirtes on February 02, 2017, 09:03:58 pm

+1

Confirm easy upgrade via SSH of latest 16.7 to 17.1.

Platform is HPE EliteDesk Mini G1 with Haswell Lynx Point chipset.