OPNsense Forum

English Forums => Hardware and Performance => Topic started by: gx on January 29, 2017, 04:40:31 pm

Title: [SOLVED] Ubiquity unifi ap
Post by: gx on January 29, 2017, 04:40:31 pm
Hi All

I recently purchased a ubiquity unifi access point. I was disappointed to discover that it has no web UI and you have to install the controller software on a local computer, I got this working but was thinking is it possible to either install opnsense on the access point or perhaps better yet (possibly via a plugin) to setup/manage the AP from a opnsense box.

Regards

GX
Title: Re: Ubiquity unifi ap
Post by: weust on January 29, 2017, 06:06:26 pm
There is no official FreeBSD package for the UniFi controller software.
It's in Ports, but imo very annoying to setup.

Mine is run in a VM running Ubuntu Server.

Also, you clearly did not read up on how to manage UbiQuiti Access Points before you bought their AP.
Which is quite amazing as it's mentioned pretty much everywhere.

Title: Re: Ubiquity unifi ap
Post by: monstermania on January 29, 2017, 07:54:08 pm
Hi,
1. You need the Uniquiti Controller only for the first config of the AP. Afterwards thr AP working without the controller.
2. If you want you can install the Uniquiti controller software on a raspberry Pi. There are some manuals how it works into web.

Regards
Dirk
Title: Re: Ubiquity unifi ap
Post by: gx on January 30, 2017, 05:25:13 am
Thanks for the replies, I will use a vm in the future.
Title: Re: Ubiquity unifi ap
Post by: Zapp on January 30, 2017, 09:33:06 am
Hi,
1. You need the Uniquiti Controller only for the first config of the AP. Afterwards thr AP working without the controller.
2. If you want you can install the Uniquiti controller software on a raspberry Pi. There are some manuals how it works into web.

Regards
Dirk

Not 100% sure but I think you can do the initial AP config from your Android phone also with the app UniFi.

I'm also running my UniFi controller from a Ubuntu VM in XenServer.

   /Jonas...
Title: Re: [SOLVED] Ubiquity unifi ap
Post by: daigoro on March 05, 2017, 03:15:53 pm
If you only have to configure one AP, Android app is able to do it.