OPNsense Forum

Archive => 17.1 Legacy Series => Topic started by: snakeaj on January 26, 2017, 08:21:23 am

Title: MultiWAN and Squid
Post by: snakeaj on January 26, 2017, 08:21:23 am

Hello!

i try to configure Multiwan and squit (how-to)
i have allready tried this in 16.7.13 with the same problem but somewhere i read a post that it will be fixed with 17.1 - so i give it a new try.

everything works fine but when i activate NAT rule i can not acces a website any more.
Ping and nslookup works fine - for example ping www.google.com or nslookup www.google.com

i will attach screenshots - if you need more information, screenshots,... tell me.

thx
alexander

Title: Re: MultiWAN and Squid
Post by: snakeaj on January 26, 2017, 08:22:15 am

you should increase the size for attachments.

Title: Re: MultiWAN and Squid
Post by: snakeaj on January 26, 2017, 08:23:35 am

i think the problem is the NAT rule.
if i deactivate that rule - everything works fine.

Title: Re: MultiWAN and Squid
Post by: franco on January 27, 2017, 12:22:16 am

The transparent proxy can't connect to the internet. It listens on 127.0.0.1.

You could try to add a floating rule with the multi-wan policy (gateway) and 127.0.0.1 as the source.

If squid can't connect, maybe e.g. a firmware upgrade also doesn't work or does it?

Otherwise, the NAT rule may not be doing what it should.


Cheers,
Franco

Title: Re: MultiWAN and Squid
Post by: franco on January 27, 2017, 12:23:28 am

Er ok, is this a manual NAT rule? Can you enable the help text on "transparent proxy" setting (click the icon) and follow the link. It has the correct rule setup...

Title: Re: MultiWAN and Squid
Post by: snakeaj on January 27, 2017, 09:14:43 am

i have deleted the NAT rule now and created the rule from the help text.
still the same problem.

please give me more information about:
You could try to add a floating rule with the multi-wan policy (gateway) and 127.0.0.1 as the source.

thx
alexander

Title: Re: MultiWAN and Squid
Post by: snakeaj on January 27, 2017, 09:19:55 am

tried your rule - is it correct?

Title: Re: MultiWAN and Squid
Post by: snakeaj on January 28, 2017, 08:12:33 am

would be nice to solve that problem  ::)

updated to 17.1.r1 and still the same problem.

Title: Re: MultiWAN and Squid
Post by: snakeaj on February 01, 2017, 09:43:20 am

is there a chance to get this problem solved?

i am on 17.1 now and same problem:

when i activate the "transparent proxy rule" i can not open a http site any more.
https, ping,.. works.