OPNsense Forum
Archive => 17.1 Legacy Series => Topic started by: FloN on January 16, 2017, 05:13:49 pm
-
Hi,
for a very creepy project I try to create more than 200 Network bridges and 400 VLAN Interfaces.
In the end about 2000 bridges and 4000 VLAN Interfaces would be great :D
But the major problem doesn't seem to be the OS restrictions, more the general performance to handle this.
OK I didn't use a server for my first test, only a new average desktop i5 computer, with only 10% of my final configuration.
I did this last year, so I can't remember very well, but after uploading the configuration I try to access the bridge settings and use the search function in the drop down menu and the web server crashes. I wait one hour before I restart the PC and it wont boot any more.
Is there any chance that your performance optimizations in PHP may solve this problem. Then I would give OPNsense a second try before I use a normal Linux System with a self made website.
-
Can you post the error message here.
The configuration import and a possible error screen can help to find the source of your issue. Your problem is probably that the system goes out of memory (memory limitation of PHP).
-
Thanks for the fast reply, I will try to reproduce the error this week. It took some time to answer, I'm currently a little bit ill... :'(
-
I use a little bit faster PC now.
My main issue seems to be that the web interface needs around 3 Minutes to load 190 Interfaces.
So I think I didn't need to try 1900 Interfaces, because that will crash the server or I don't want to wait 30mins every time.
Config Parts are attached.
Offtopic:
Its a Fujitsu D556 and it got every 3 seconds some ACPI Errors, but that seems to be a implementation problem which is known by the linux kernel developer team.