OPNsense Forum

Archive => 16.7 Legacy Series => Topic started by: mwiora on November 28, 2016, 09:22:47 pm

Title: [SOLVED] changes to ipsec log configuration doesn't change anything
Post by: mwiora on November 28, 2016, 09:22:47 pm

Hi @all,

am I missing something or are any changes to the log configuration of IPsec currently without any configuration change?

I've configured all to Highest Loglevel, but the Log Output (also on console) is unchanged (not giving any detailled or diagnostic information).
Even a restart of the service or the application doesn't change anything to that.

Cheers,
Matthias

Title: Re: changes to ipsec log configuration doesn't change anything
Post by: AdSchellevis on November 28, 2016, 10:38:09 pm

Hi Matthias,

You're right, we fixed the logging last week.

https://github.com/opnsense/core/commit/a49a22235a0d63e735ffb55c01d392481c19a7f4#diff-4163011dc6ff4d2613d2c083823ece43 (https://github.com/opnsense/core/commit/a49a22235a0d63e735ffb55c01d392481c19a7f4#diff-4163011dc6ff4d2613d2c083823ece43)

This patch will be in the next version, if you want to test it upfront, you can use the following command:

Code: [Select]

opnsense-patch a49a2223

When the patch is applied, you still need to restart ipsec after changing the log levels.

Best regards,

Ad

Title: Re: changes to ipsec log configuration doesn't change anything
Post by: mwiora on November 28, 2016, 11:52:37 pm

Hi Ad,

Couldn't find anything using google regarding this...
thank you very much!

Cheers,
Matthias

Title: Re: [SOLVED] changes to ipsec log configuration doesn't change anything
Post by: franco on November 30, 2016, 08:56:21 am

Hi Matthias,

I'm adding this patch to 16.7.10. Won't be long. :)


Cheers,
Franco