OPNsense Forum

Archive => 16.7 Legacy Series => Topic started by: samnet on November 27, 2016, 10:24:40 am

Title: ANyone knows clear instruction on how to setup PPPOE Server
Post by: samnet on November 27, 2016, 10:24:40 am
Could you pls help with this issue, I have created pppoe server instance on opt2 interface having ip (192.168.200.1/24)

and created pppoe server instance and gave it ip 192.168.200.250

and also went and created virtual ip (alias type) of  ip (192.168.200.251/32) yet I cant get any replies on my client requesting pppoe auth ive used builtin win7 pppoe client and ive used tplink modem here is tplink logs

193   1st day 18:35:24   PPP   INFO:   In pppd the httpd-id is 609, set link phase is 0x0
192   1st day 18:35:24   PPP   INFO   :send_phase 2091 pppd_phase = 0x0, ipv6 = 0, ipv4 = 0^M
191   1st day 18:35:24   PPP   ERROR:   Timeout waiting for PADO packets
190   1st day 18:35:24   PPP   INFO:   In pppd the httpd-id is 609, set link phase is 0x66
189   1st day 18:35:24   PPP   INFO:   send_phase 2091 pppd_phase = 0x66, ipv6 = 0, ipv4 = 0^M
188   1st day 18:35:04   PPP   INFO   :sent [PADI Host-Uniq(0x00000965)]
187   1st day 18:34:54   PPP   INFO   :sent [PADI Host-Uniq(0x00000965)]
186   1st day 18:34:49   PPP   INFO   :sent [PADI Host-Uniq(0x00000965)]
185   1st day 18:34:49   PPP   INFO   :In pppd the httpd-id is 609, set link phase is 0x2
184   1st day 18:34:49   PPP   INFO   :send_phase 2091 pppd_phase = 0x2, ipv6 = 0, ipv4 = 0^M


am i missing anything?