OPNsense Forum

Archive => 16.7 Legacy Series => Topic started by: kapara on October 27, 2016, 07:36:27 am

Title: [SOLVED] IPSEC Firewall Rules tab not showing after enabling IPSEC
Post by: kapara on October 27, 2016, 07:36:27 am

I am a long time pfsense user and after enabling IPSEC I would have to go and create a rule on the IPSEC Firewall Rules TAB.  But after enabling and saving there is no IPSEC Tab under firewall rules.

Title: Re: IPSEC Firewall Rules tab not showing after enabling IPSEC
Post by: franco on October 27, 2016, 09:38:02 am

Are you on version 16.7.6 or later? You reapply a config setting just to make sure that there is no issue. :)


Cheers,
Franco

Title: Re: IPSEC Firewall Rules tab not showing after enabling IPSEC
Post by: kapara on October 27, 2016, 06:25:19 pm

Not sure what you mean by re-apply a config setting.  This is a brand new install on 16.7

Title: Re: IPSEC Firewall Rules tab not showing after enabling IPSEC
Post by: kapara on October 27, 2016, 06:28:21 pm

after disabling and enabling 4 times it came up

Title: Re: IPSEC Firewall Rules tab not showing after enabling IPSEC
Post by: franco on October 27, 2016, 06:58:37 pm

Hi kapara,

Ok, make sure to upgrade to 16.7.x before configuration and bug reporting, it will help trouble shooting. I think this was properly fixed in 16.7.5. :)

https://github.com/opnsense/changelog/blob/master/doc/16.7.5#L37


Cheers,
Franco

Title: Re: [SOLVED] IPSEC Firewall Rules tab not showing after enabling IPSEC
Post by: reep on January 16, 2017, 03:56:38 pm

This still happens in 16.7.13

I modified an Ipsec connection, went back to rules and they are not there. If I create a new Ipsec rule, the others reappear.

Bug required ?

B. Rgds
John