OPNsense Forum
Archive => 16.7 Legacy Series => Topic started by: Rayman on October 05, 2016, 10:01:57 am
-
Hi,
Just had a new A10QC SSD appliance.
My WAN PPPOE connection to Xs4all drops frequently (3 - 4 times in the evening). The connection comes back up in a couple of minutes. TV continues to work.
I have a Xs4all fiber connection and followed this guide to set it up:
http://blog.firewallonline.nl/how-to-en-tutorials/xs4all-glasvezel-internet-iptv-op-pfsense-opnsense/
I did have OPNsense before on a computer with a SuperMicro board in it, and my connection never dropped before.
In the log I find this, which might be related?
Oct 4 22:53:29 opnsense: /widgets/api/get.php: The command `/usr/local/sbin/ifinfo 'pppoe1'' failed to execute
Oct 4 22:53:28 opnsense: /widgets/api/get.php: The command `/sbin/ifconfig 'pppoe1'' failed to execute
Oct 4 22:53:27 opnsense: /index.php: The command `/usr/local/sbin/ifinfo 'pppoe1'' failed to execute
Oct 4 22:53:27 opnsense: /index.php: The command `/sbin/ifconfig 'pppoe1'' failed to execute
Oct 4 22:51:59 opnsense: /usr/local/etc/rc.linkup: HOTPLUG: Configuring interface opt2
Oct 4 22:51:59 opnsense: /usr/local/etc/rc.linkup: DEVD Ethernet attached event for opt2
Oct 4 22:51:59 configd.py: [0663a837-9193-4ea0-ae80-a856dded3adf] Linkup starting em1_vlan4
Oct 4 22:51:59 devd: Executing '/usr/local/opnsense/service/configd_ctl.py interface linkup start em1_vlan4'
Oct 4 22:51:58 configd.py: [64090e03-9389-447f-ac17-da150e4433cd] updating dyndns opt2
Does anyone have an idea what might be wrong?
Kind regards,
Ray
-
Hi Rayman,
Looking at the how-to you followed I wonder how is the LAN (internet) connected?
Is LAN on a separate interface (em0) ?
If IPTV still works and relies on the same physical connection then its probably not related to the hardware.
With your previous configuration did you use the exact same settings ?
P.S.
You can also call us at Deciso so we can discus this by phone.
-
I'll call tomorrow then. Thank you!