OPNsense Forum

Archive => 16.7 Legacy Series => Topic started by: wifimasters on September 29, 2016, 03:45:52 pm

Title: Captive Portal Command Line Guide Documentaion
Post by: wifimasters on September 29, 2016, 03:45:52 pm

Hello Dev,

Is there a command line guide or documentation for the captive portal. Would great to troubleshoot from the back end. Hit me back.

Cheers!

Title: Re: Captive Portal Command Line Guide Documentaion
Post by: AdSchellevis on September 29, 2016, 09:21:54 pm

Hi wifimasters.

The most important information is in our docs https://docs.opnsense.org/manual/how-tos/guestnet.html (https://docs.opnsense.org/manual/how-tos/guestnet.html).
To get a full list of supported configd commands for CP, you can try this on the command line:

Code: [Select]

configctl configd actions list | grep captive
For more detailed use, you have to dig into the code, but the provided gui functions will deliver the same output as the configd calls using the api underneath.

Best regards,

Ad

Title: Re: Captive Portal Command Line Guide Documentaion
Post by: wifimasters on September 30, 2016, 07:10:02 pm

Thanks Ad!

Will try once I get my ALIX 2D13 is fixed.

I was updating the BIOS and the a sudden power outage, tried to boot and start over again and now all i see is an empty screen. Tried all the baud rates but nothing happens.

I hope some experts here can help me.

Thanks!