OPNsense Forum

Archive => 16.7 Legacy Series => Topic started by: bulmaro on August 18, 2016, 09:58:08 pm

Title: MULTI WAN Failover
Post by: bulmaro on August 18, 2016, 09:58:08 pm

Greetings to all
I am configuring WAN1 and WAN2, I can not go on the internet on the LAN, I followed step by step guide
https://docs.opnsense.org/manual/how-tos/multiwan.html
Someone can help me

I appreciate the attention

Title: Re: MULTI WAN Failover
Post by: reep on August 19, 2016, 01:46:45 am

I believe you need to enable gateway monitoring

Please reread the HowTo at Step 1

Step 1 - Add monitor IP’s
Make sure monitoring is enabled

Note there are various issues with apinger for gateway monitoring and YMMV

https://github.com/opnsense/apinger

Rgds
John

Title: Re: MULTI WAN Failover
Post by: bulmaro on August 19, 2016, 08:00:47 pm

I thank you for the prompt reply.
My error was, on the client computer only has primary DNS ip my firewall, until Secondary DNS 8.8.8.8 place, and could explore the Internet client computer.

do something missing in the DNS Firewall rule that the primary DNS is resolved in team clients?

Title: Re: MULTI WAN Failover
Post by: bulmaro on August 20, 2016, 12:08:05 am

The problem was resolved.
the problem was the order of the rule in firewall
Thank you for your attention