Print Page - APU1 installer issues

Hi everybody,

I'm trying to install OPNsense-16.7-OpenSSL-serial-amd64 on the mSATA drive of a APU1D4 from PCEngines http://pcengines.ch/apu1d4.htm,

flashed the usb key for installing it, booted with no issues, as I go through the installer I see no issues, it reaches the

Code: [Select]

/usr/local/bin/cpdup -vvv -I -o /boot /mnt/boot
and it gets stuck at 8%
then throws these error

Code: [Select]

Execution of the command 
 /usr/local/bin/cpdup -vvv -I -o /boot /mnt/boot
was cancelled.

here's the log

Code: [Select]

  ▒ BSD Installer started                                                    ▒
  ▒ DFUI connection on tcp:9999 successfully established                     ▒
  ▒ ,- opened pty to '/sbin/sysctl -n hw.physmem'                            ▒
  ▒ < 4227469312                                                             ▒
  ▒ `- closed pty to '/sbin/sysctl -n hw.physmem'                            ▒
  ▒ `/sbin/sysctl -n hw.physmem` returned: 4227469312                        ▒
  ▒ ,- opened pty to '/sbin/sysctl -n kern.disks'                            ▒
  ▒ < da1 da0 ada0                                                           ▒
  ▒ `- closed pty to '/sbin/sysctl -n kern.disks'                            ▒
  ▒ `/sbin/sysctl -n kern.disks` returned: da1 da0 ada0                      ▒
  ▒ Testing da1                                                              ▒
  ▒ Invoking survey for da1                                                  ▒
  ▒ Surveying Disk: da1 ...                                                  ▒
  ▒ ,- opened pty to '/sbin/fdisk da1'                                       ▒
  ▒ < ******* Working on device /dev/da1 *******                             ▒
  ▒ < parameters extracted from in-core disklabel are:                       ▒
  ▒ < cylinders=973 heads=255 sectors/track=63 (16065 blks/cyl)              ▒
  ▒ <                                                                        ▒
  ▒ < parameters to be used for BIOS calculations are:                       ▒
  ▒ < cylinders=973 heads=255 sectors/track=63 (16065 blks/cyl)              ▒
  ▒ < <above>:/tmp/.cdrom/root on /root (unionfs, local)                     ▒
  ▒ < <above>:/tmp/.cdrom/usr on /usr (unionfs, local)                       ▒
  ▒ < <above>:/tmp/.cdrom/var on /var (unionfs, local)                       ▒
  ▒ ( EOF )                                                                  ▒
  ▒ `- closed pty to '/sbin/mount -o async'                                  ▒
  ▒ ,-<<< Executing `/sbin/mount -o async /dev/ada0s1a /mnt/'                ▒
  ▒ `->>> Exit status: 0                                                     ▒
  ▒ ,-<<< Executing `/usr/local/bin/cpdup -vvv -I -o /.cshrc /mnt/.cshrc'    ▒
  ▒ `->>> Exit status: 0                                                     ▒
  ▒ ,-<<< Executing `/usr/local/bin/cpdup -vvv -I -o /.profile               ▒
  ▒ /mnt/.profile'                                                           ▒
  ▒ `->>> Exit status: 0                                                     ▒
  ▒ ,-<<< Executing `/usr/local/bin/cpdup -vvv -I -o /COPYRIGHT              ▒
  ▒ /mnt/COPYRIGHT'                                                          ▒
  ▒ `->>> Exit status: 0                                                     ▒
  ▒ ,-<<< Executing `/usr/local/bin/cpdup -vvv -I -o /bin /mnt/bin'          ▒
  ▒ `->>> Exit status: 0                                                     ▒
  ▒ ,-<<< Executing `/usr/local/bin/cpdup -vvv -I -o /boot /mnt/boot'        ▒
  ▒ [Thu Aug 4 15:23:25 2016]                                                ▒
  ▒ `->>> Exit status: 15                                                    ▒

I've already tried the boot with the "known to work on pfsense" options
references:
http://www.yawarra.com.au/tutorials/how-to-install-pfsense-on-an-apu
https://forum.pfsense.org/index.php?topic=59555.msg406438#msg406438

am I supposed to flash the nano image directly on mSATA drive?
I'll prefer a full install if possible since the hardware is capable of handling it (at least on paper).

thanks in advance for your help.

Hi penzoiders,

First time I've seen it break so early during install... Is this new hardware or did something work on it before?

What I can think of at first sight:

(a) Image or usb key was bad, or
(b) disk may not work if new.

Both of these theories can be revoked. Would be interesting to know what error 15 is. There's nothing else in the log.

Cheers,
Franco

the usb key is ok (tried 2 different), images md5 are ok, I try to put a new mSATA drive (if I find a spare one... probably that's broken... but it used to work with a debian on it, SSD fail silently some times).

will keep you posted .

thanks

I did several installs to the apu1.
First is your bios up to date?
I use all the time a external pc to load the images.
You can "dd" the embedded image either to the flash card or if you have an adapter to the msata.

Gesendet von iPhone mit Tapatalk

so you suggest to flash the nano image directly on mSATA.
I'll try that. thanks.

I don't have another mSATA to try so I'll snap that on different platfrom and flash the nano image onit.

OPNsense Forum

Archive => 16.7 Legacy Series => Topic started by: penzoiders on August 04, 2016, 05:33:03 pm