OPNsense Forum

English Forums => General Discussion => Topic started by: Qinn on July 24, 2016, 10:24:53 am

Title: [SOLVED] RTT
Post by: Qinn on July 24, 2016, 10:24:53 am

HI there I have noticed that the RTT (gateway) always reads 0.0ms and 0.0% loss on a DSL connection. Of course that's fine, but when using pfsense there were measurements every 3 sec and they did differ. OPNsense is of course better than pfsense ;) , but a steady 0.0 seems a bit too good to be true. Can anyone explain this? Has it something to do with apinger? Thanks in advance.

Title: Re: RTT
Post by: franco on July 24, 2016, 01:02:40 pm

Hi Qinn,

Gateway monitoring via apinger is off by default, you'll have to go to the gateway itself and enable monitoring in order to get appropriate readings.


Cheers,
Franco

Title: Re: RTT
Post by: Qinn on July 24, 2016, 03:10:13 pm

Quote from: franco on July 24, 2016, 01:02:40 pm

Hi Qinn,

Gateway monitoring via apinger is off by default, you'll have to go to the gateway itself and enable monitoring in order to get appropriate readings.


Cheers,
Franco

Missed that one  ??? , thanks for pointing that one out to me,  Gateway Monitoring is disabled by default I see.