OPNsense Forum
Archive => 16.7 Legacy Series => Topic started by: silent_mastodon on July 15, 2016, 04:09:15 am
-
Hello,
I'm trying to install the RC in a xenserver VM, and one of the early installation commands is erroring out
"Execution of command
/usr/local/bin/cpdup -vvv -I -o /etc /mnt/etc
FAILED with a return code of 1"
I viewed the log but it didn't appear to contain anything more than what the error above already stated.
My vdisk is set to 10GB, which I assume it large enough for the non-nano installer.
Anyone run into this sort of thing before?
-
Hmm. Seems to happen with the 16.1.8 image as well. I'm guessing this is something with my configuration.
-
Grrrrr, nevermind. I allocated too little RAM to the VM. I assumed 256MB would be enough (it's a very small lab testcase setup, not a production setup) but the installer proceeds correctly now. I might try reducing the RAM again after the install is completed.
-
I will add a low RAM warning for the final 16.7 images :)
https://github.com/opnsense/ports/issues/19