OPNsense Forum

Archive => 16.1 Legacy Series => Topic started by: silent_mastodon on July 02, 2016, 08:17:42 am

Title: access webgui on LAN port from openvpn TAP
Post by: silent_mastodon on July 02, 2016, 08:17:42 am

Greetings

I have a TAP-style OpenVPN set up, and I can ping around remotely, access LAN servers, etc. Everything seems good.

The only oddity is that while I can ping the opnsense LAN interface, I can't access the webgui in a browser.

The firewall rules for the OpenVPN server, the bridge interface, and the LAN are all completely open.

It's not really super-necessary (I can access the webgui remotely through a NAT rule) it's weird to me that I can't access it "from inside" the LAN network.

Any ideas? I can access the webgui from a local LAN machine. It's only remote hosts through the TAP that can't.

Title: Re: access webgui on LAN port from openvpn TAP
Post by: Julien on July 02, 2016, 09:45:07 pm

what are the firewall rules on the WAN side ? are you Nating any ports ?

Title: Re: access webgui on LAN port from openvpn TAP
Post by: silent_mastodon on July 03, 2016, 12:35:05 am

The only NAT rule on the WAN is a port redirect for accessing the webgui remotely.

There is a WAN firewall rule for allowing remote machines to access the OpenVPN. That is all.