OPNsense Forum

English Forums => General Discussion => Topic started by: afall on January 25, 2023, 01:21:38 am

Title: Installing problem with supermicro
Post by: afall on January 25, 2023, 01:21:38 am

I just got myself a super micro SYS-5019D-4C-FN8TP. I installed opnsense 22.7 and it went fine. Until the interface assignment. It didn't detect any interfaces. Was wondering if anyone ran into this same issues. 

Title: Re: Installing problem with supermicro
Post by: lilsense on January 25, 2023, 04:36:46 am

did you check to see if the Freebsd supports the mobo?

Title: Re: Installing problem with supermicro
Post by: cookiemonster on January 25, 2023, 11:03:10 am

Nice kit. According to SuperMicro product page, they are Intel interfaces. They are :

Code: [Select]

Network Controllers
    Dual 10G SFP+ via SoC
    Quad 1GbE with Intel I350-AM4
    Dual 10GBase-T with Intel X557
1 GB ones are standard stuff, famous "should work". Check BIOS settings and dmesg.

Title: Re: Installing problem with supermicro
Post by: afall on January 25, 2023, 03:45:00 pm

Thanks for pointing me in the BIOS. I didn't see any setting in there to disable the ethernet ports. But i did do a reset of the bios and now everything seem to work.