OPNsense Forum

English Forums => Zenarmor (Sensei) => Topic started by: paperware on January 09, 2023, 01:23:54 pm

Title: Zenarmor Profile is not working
Post by: paperware on January 09, 2023, 01:23:54 pm

Hello all,

i started a 15 day test period. I cloned the "Default" policy and adjusted the cloned policy to my needs.
After a reboot i went to Zenarmor -> Reports -> Live Session Explorer. In every line wich is reported is only
the "Default" Policy mentioned. If i filter for Policy and use the name of my Policy, there is nothing to see.

May i have done something wrong or missing somewhat.
In general configuration it is set to:

Routed Mode (L3 Mode, Reporting + Blocking) with native netmap driver
Database: MongoDB
Deployment Size: Medium (max. 100)
Protected Interfaces: LAN, DMZ

The cloned policy is on status active.

Title: Re: Zenarmor Profile is not working
Post by: sy on January 09, 2023, 06:14:45 pm

Hi,

Zenarmor policies work with "AND" condition. Please see the following link for the further details.

https://www.sunnyvalley.io/docs/opnsense/policies/adding-new-policy#policy-configuration

Title: Re: Zenarmor Profile is not working
Post by: paperware on January 10, 2023, 11:31:23 am

Hello sy,
thank you for your reply. After reading the information in the provided link, i decided to delete my "cloned" policy and create on using the "+" sign und starting the Wizzard. This rule works now. May my fault was to clone the default policy. However, now it works and i thank you.

Title: Re: Zenarmor Profile is not working
Post by: sy on January 12, 2023, 07:52:24 pm

Hi,

It's my pleasure.