OPNsense Forum

Archive => 15.1 Legacy Series => Topic started by: Pulsar on April 05, 2015, 08:43:08 pm

Title: [SOLVED] "Traffic Shaper" interface not functional?
Post by: Pulsar on April 05, 2015, 08:43:08 pm
Either I don't catch how use it, either it does not work as intended. So, I click on "Traffic Shaper", on the "by Interface" tab then click on "Enable this discipline" (the queue name that shows up is "wan" by the way) and enter some BW limit then I click on "Save" then "Apply". 

To my surprise nothing has been changed for the interface "WAN" but a new icon with no name appears on the left of the page, just on the top of "WAN". Whenever I click this icon  I get an error => Queue not found :)

Also, how to add a sub-queue?  The button "Add new queue" does not seems to do something...   :-\
Title: Re: "Traffic Shaper" interface not functional?
Post by: andyalonzo on April 09, 2015, 04:31:09 pm
Same here, that is the most important feature i need, now i will switch to pfsense.
OPNSense is nice, but not functional.
Title: Re: "Traffic Shaper" interface not functional?
Post by: franco on April 09, 2015, 04:35:49 pm
Trying to cope with a disappearing open source repository named pfsense-tools.git a little over 14 months ago is still showing how bad the move really was for the open source community. We wish you luck on your endeavour. We only do what we can given the circumstances and the willingness of users to help us get better. Thank you.
Title: Re: "Traffic Shaper" interface not functional?
Post by: Pulsar on April 09, 2015, 06:15:37 pm
Well, perfectly normal for something "young" to have angles to be polished. It will improve over time, thank you for your good work and continuous efforts :)
Title: Re: "Traffic Shaper" interface not functional?
Post by: jstrebel on April 09, 2015, 10:42:36 pm
Why not using the traffic shaper of monowall? It works


Gesendet von iPhone mit Tapatalk
Title: Re: "Traffic Shaper" interface not functional?
Post by: Aergan on April 12, 2015, 08:01:45 pm
Just trying to get through the "Dedicated Links" wizard now comes up with:
Quote
You have less interfaces than number of connections!

Was previously working (well, I could get through the wizard at least) before build 15.1.9.
Title: Re: "Traffic Shaper" interface not functional?
Post by: franco on April 13, 2015, 08:24:08 am
I'm assuming WAN count "1" works, but "2" doesn't. The code checks which interfaces have gateways (IPv4 or v6) or is of the following type: dhcp, pppoe, pptp, l2tp, ppp, ovpn, gif, gre.

Maybe your setup changed? Maybe an interface setting got lost? We haven't touched the wizard in the last 3 months. Any help to debug this is appreciated. :)
Title: [SOLVED] Re: "Traffic Shaper" interface not functional?
Post by: Pulsar on April 17, 2015, 01:36:39 pm
Just took the time to update to the latest release (15.1.9.1), now it works wonderfully well but I did not test it with 15.1.9... according to the changelog for the 15.1.9.1 release  it should work as well under 15.1.9 :-)
Title: Re: [SOLVED] "Traffic Shaper" interface not functional?
Post by: Aergan on April 18, 2015, 07:37:22 am
Unfortunately OPNsense 15.1.9.1-amd64 is still showing the same issue for me. I'll try a fresh install of 15.1.9 later on the same configuration to see if that helps.

Some further information about my set-up:

Originally I installed and configured with a single vNIC with VLAN support but I found then that I was seeing errors in the logs for features not being supported, so I reconfigured to two vNIC's & factory reset the OS.
Title: Re: [SOLVED] "Traffic Shaper" interface not functional?
Post by: Aergan on April 18, 2015, 09:59:27 am
Right, still not working on a reinstall.

Seems to be Hyper-V / VM related though? https://forum.pfsense.org/index.php?topic=83475.0
Title: Re: [SOLVED] "Traffic Shaper" interface not functional?
Post by: franco on April 20, 2015, 10:00:41 am
Aergan, thanks for narrowing that down. `hn' is now in the list, will be in 15.1.9.2 (this week most likely):

https://github.com/opnsense/core/commit/72bcc260e442865965bb0b09dd2bf7de3bced32e
Title: Re: [SOLVED] "Traffic Shaper" interface not functional?
Post by: Aergan on April 24, 2015, 09:53:11 am
Many thanks, seems to be working again now :)