OPNsense Forum

English Forums => Zenarmor (Sensei) => Topic started by: lrosenman on November 07, 2021, 11:55:56 pm

Title: ProtectLi FW6B/1G ATT Fiber: Will it work?
Post by: lrosenman on November 07, 2021, 11:55:56 pm

I have a Protectli FW6B (I3-7100U/8G memory, 250G SSD) running the latest OPNSense.  Will Zenarmor work at a full gigabit line rate with this box?  The nic's are em driver.

Any gotchas? 

I do have another server I can offload the Elasticsearch to.

Title: Re: ProtectLi FW6B/1G ATT Fiber: Will it work?
Post by: sy on November 08, 2021, 02:57:20 am

Hi Ironson,

For a Gbit connection, You need an i5 or higher CPU. Please refer to the following document:

https://www.sunnyvalley.io/docs/introduction/hardware-requirements

But if you separate the reporting as Remote Elastic, your config can handle it.

Title: Re: ProtectLi FW6B/1G ATT Fiber: Will it work?
Post by: lrosenman on November 08, 2021, 02:59:14 am

I've set it up as remote elastic, but the dashboard is whining about no elastic service. :(

Title: Re: ProtectLi FW6B/1G ATT Fiber: Will it work?
Post by: lrosenman on November 08, 2021, 03:55:17 pm

Ok, after getting my license (home), it seems to be doing fine (I think my issue was related to the dhcp6c crash I just reported in the 21.7 forum. 

Title: Re: ProtectLi FW6B/1G ATT Fiber: Will it work?
Post by: lrosenman on November 08, 2021, 09:22:47 pm

Now that dhcp6c has been stable for a few hours, and remote elastic search is working well, I'm impressed.

with my Bacula full backup running, I still get very decent speeds (without Zenarmor it's 940/940)

Now to start turning on some of the policy stuff.

https://www.lerctr.org/~ler/SpeedTest-2021-11-08_1419.png (https://www.lerctr.org/~ler/SpeedTest-2021-11-08_1419.png)