OPNsense Forum

English Forums => General Discussion => Topic started by: francabicon on September 21, 2021, 04:44:21 am

Title: PPPOE WAN port down
Post by: francabicon on September 21, 2021, 04:44:21 am

Hi I've this is this issue that which i've connected my want port to through PPPOE and there is uplink with a public ip address but after a few minutes it has some disconnection. To fix this issue i'll have to physically unplug and insert back to the modem in order to get it work. here below is my config and also they didn't is it halfduplex or  duplex or the speed of the connection.
(https://user-images.githubusercontent.com/52349593/133879887-eb7b7230-5fc2-433f-8153-25e3c331be4e.png)

Title: Re: PPPOE WAN port down
Post by: krzysztofb on May 30, 2022, 10:55:48 pm

Did you solve this? I have a similar PPPoE issue (https://forum.opnsense.org/index.php?topic=28508.0) and so far, no luck...

Title: Re: PPPOE WAN port down
Post by: meyergru on May 31, 2022, 12:14:07 am

I would guess that the issue in this case was than pppoe0 was assigned to both ix3 and ix3_vlan621...