OPNsense Forum

Archive => 21.1 Legacy Series => Topic started by: ashold7 on March 29, 2021, 11:01:43 pm

Title: IPv6-only PPPoE
Post by: ashold7 on March 29, 2021, 11:01:43 pm

My Setup: The vigor 130 is used as a modem (I can confirm that the modem is working because in my current setup it is also acting as a modem.). I want to install opnsense behind the vigor 130 as a router.

The Problem/Story: For a long time I am trying to get ds-lite (ipv4 to ipv6 transition technology mostly used in Germany.)to work on opnsense. I know that it is not officially supported. However I have read that several people had success nonetheless. However for me it did not work. I already asked in the German Forum and the users there confirmed that in General my configuration for ds-lite is working. We broke it down to the issue that ipv6-only pppoe is not working probably. Therefore I am asking if anyone here has any idea what the problem is. The screenshots of the logs and the configuration can be found in the German post: https://forum.opnsense.org/index.php?topic=22286.0. I am going to try to get a packet capture of the pppoe connection attempt. However if someone has an idea, feel free to help. Any help is appreciated.

Title: Re: IPv6-only PPPoE
Post by: franco on March 30, 2021, 09:16:33 am

I think the issue still stands: historically single stack IPv4 was implemented and then IPv6 dual stack was added. Some of these issues are still in the code and complicated a lot by the use of PPPoE interspersed. It needs to be reworked, but we do not have a clear outline yet.


Cheers,
Franco

Title: Re: IPv6-only PPPoE
Post by: franco on March 30, 2021, 10:16:27 am

PS: 21.1.4 goes out today with a patch in the right direction, but still baby steps so to speak: https://github.com/opnsense/core/commit/52d6e4a063

Title: Re: IPv6-only PPPoE
Post by: marjohn56 on March 30, 2021, 04:00:53 pm

maybe we should re-label it "Use PPPoE link' rather than 'Use IPv4 connectivity', after all if the user is not using v4 then it makes no sense.

Title: Re: IPv6-only PPPoE
Post by: franco on March 30, 2021, 04:27:18 pm

But the issue is it uses the IPv4 rc.newwan script so without IPv4 it will never work... The name is correct and it works as designed. ;)


Cheers,
Franco

Title: Re: IPv6-only PPPoE
Post by: marjohn56 on March 30, 2021, 04:29:18 pm

The script called be called 'Franco's_nightmare', it would still work, but that doesn't make it correct.

Title: Re: IPv6-only PPPoE
Post by: franco on March 30, 2021, 04:31:39 pm

Fair point. The stuff needs to go to ppp linkup script at least I think...


Cheers,
Franco

Title: Re: IPv6-only PPPoE
Post by: ashold7 on March 30, 2021, 06:36:04 pm

Does this mean I just have to wait and there is no comfortable way to fix this?

Title: Re: IPv6-only PPPoE
Post by: franco on March 30, 2021, 07:12:19 pm

For now there is no solution, yes. It would help to track a feature request... https://github.com/opnsense/core/issues/new?assignees=&labels=&template=feature_request.md&title=


Cheers,
Franco