OPNsense Forum

Archive => 21.1 Legacy Series => Topic started by: rubenx on February 24, 2021, 03:02:30 pm

Title: NTP not working after update to OPNsense 21.1.2-amd64
Post by: rubenx on February 24, 2021, 03:02:30 pm

I updated my firmware to the new version yesterday and since then my NTP has been up but not connecting.


All the peers are in UNREACH/PENDING status and the log shows that requests are going out.

log:
2021-02-24T08:54:11   ntpd[56084]   216.197.156.83 8011 81 mobilize assoc 1571   
2021-02-24T08:54:11   ntpd[56084]   DNS 3.opnsense.pool.ntp.org -> 216.197.156.83   
2021-02-24T08:54:11   ntpd[56084]   206.108.0.131 8011 81 mobilize assoc 1570   
2021-02-24T08:54:11   ntpd[56084]   DNS 2.opnsense.pool.ntp.org -> 206.108.0.131   
2021-02-24T08:54:11   ntpd[56084]   206.108.0.133 8011 81 mobilize assoc 1569   
2021-02-24T08:54:11   ntpd[56084]   DNS 1.opnsense.pool.ntp.org -> 206.108.0.133   
2021-02-24T08:54:11   ntpd[56084]   199.182.221.110 8011 81 mobilize assoc 1568   
2021-02-24T08:54:11   ntpd[56084]   DNS 0.opnsense.pool.ntp.org -> 199.182.221.110   
2021-02-24T08:54:11   ntpd[56084]   0.0.0.0 c016 06 restart

Any help would be appreciated, thanks.

Title: Re: NTP not working after update to OPNsense 21.1.2-amd64
Post by: littlepepper on February 24, 2021, 06:36:59 pm

Try changing your ntp servers.

Pick one from here: https://www.ntppool.org/en/

Change that... restart the service and try ntptime via commandline and see if it returns something sensible.

Title: Re: NTP not working after update to OPNsense 21.1.2-amd64
Post by: rubenx on February 24, 2021, 08:23:51 pm

It's working now.  I had to reconfigure the Time Service and I mistakenly checked the LAN interface.

Cleared that and fixed.