OPNsense Forum
Archive => 15.7 Legacy Series => Topic started by: Yordan Yordanov on January 27, 2016, 06:00:40 pm
-
I have 9 configured and running IPsec tunnels on 15.7.24. However nothing is shown on the page VPN - IPsec - Status Overview - the page is empty, only the columns show. I didn't have this problem on 15.1. I have had this problem since the new interface was introduced. Tested with Internet Explorer, Firefox and Chrome - no difference.
-
Hi Yordan,
There's one other issue reported with some more debug information at GitHub (https://github.com/opnsense/core/issues/634 (https://github.com/opnsense/core/issues/634)).
We haven't been able to reproduce this yet.
Can you check if your issue is the same?
Regards,
Ad
-
We could try to provide a patched version like pfSense has. I will try to provide one till the weekend after the 16.1 excitement settles. :)
-
Yes, it seems it is the same issue. Hope you'll be able to provide a patch soon, there were some useful buttons like Connect/Disconnect on this screen which were handy in some situations. :)
-
The patch in question is here, but it seems that it may still hang according to a comment from another user one week ago. There is no official upstream fix yet.
https://wiki.strongswan.org/issues/1185