OPNsense Forum

English Forums => Hardware and Performance => Topic started by: filmar on December 22, 2020, 04:46:31 am

Title: Router Mode = 135Mbps, Access point Mode = 10Mbps : WHY ?
Post by: filmar on December 22, 2020, 04:46:31 am

Hi,

Last weekend I mounted my first OpnSense installation on a Lenovo computer 4 cores, 8Gb RAM, 120Gb SSD. I installed PCIE 4 RJ45 ports on this computer.

My setup is Internet => OpnSense => LAN => Asus RT-AC68U.
                                                   => DMZ => Lenovo (Web Server)

I configured WAN, LAN, DMZ. WAN is on the onboard network interface. Lan is on the first interface of PCIE and DMZ on another interface of the PCIE.

When I put Asus to Router Mode, I got 135Mbps. Why when I put it to Access Point Mode, the connexion drop to 10-15Mbps ?

If I put again to Router Mode, the connexion come back to 135Mbps.

I got the same result with Netgear R7000.

Your help will be appreciated.

Thank you !!

Title: Re: Router Mode = 135Mbps, Access point Mode = 10Mbps : WHY ?
Post by: tswalker on December 29, 2020, 12:15:09 am

when in AP mode did you change from WAN port to LAN port on the Asus and Netgear for the connection?

Title: Re: Router Mode = 135Mbps, Access point Mode = 10Mbps : WHY ?
Post by: filmar on December 29, 2020, 12:16:24 am

Yes I tried both, WAN and LAN and the result is the same.