OPNsense Forum

Archive => 15.7 Legacy Series => Topic started by: mfaridi on January 19, 2016, 12:49:43 pm

Title: two ADSL lines , load balance and failover
Post by: mfaridi on January 19, 2016, 12:49:43 pm
for my university project I must do this
in university we have two ADSL line and 32 users, I want OPNsense share internet between users and use can use internet , each user has one IP and user do not use DHCP  for get IP , I want OPNsense share internet , load balance it and failover it .
I test pfsense but pfsense can not do this for me and my project failed . so I want test this project by OPNsense .
please help , I can do this
each ADSL line give IP by DHCP.
Title: Re: two ADSL lines , load balance and failover
Post by: mfaridi on January 20, 2016, 12:19:14 pm
I need help please , this is my university project .
I search google and handbook and wiki , and I can not find good guide.
I find many guides about pfsense . but my project failed by pfsense.
Title: Re: two ADSL lines , load balance and failover
Post by: RyujinJakka on January 20, 2016, 01:19:01 pm
I'm sorry but its not really up to people on a forum to do your homework for you.

You also haven't really provided any real information as to what your problem even is... What have you done to try and set this up and make it work?
Title: Re: two ADSL lines , load balance and failover
Post by: mfaridi on January 20, 2016, 01:22:47 pm
I'm sorry but its not really up to people on a forum to do your homework for you.

You also haven't really provided any real information as to what your problem even is... What have you done to try and set this up and make it work?
Thanks.
My problem is this , I can not find good guide about multiwan and load balance in OPNsense , and I can not config it .
I think we need clean guide for multiwan and loadbalance and failover.
Title: Re: two ADSL lines , load balance and failover
Post by: newbug on January 23, 2016, 12:08:21 am
Hi mfaridi,
Multi-WAN is the correct feature to look for. I have not had the opportunity to do Multi-WAN on OPNsense.

I'm suggesting to create the guest you mentioned right here. Can you please what what you have done thus far? (2 separate interfaces for you 2 WAN, etc.) Please be sure both WAN interfaces are up and functioning before trying to configure the gateway group(s). I will build a test box and compare.

<bug~