OPNsense Forum

Archive => 20.7 Legacy Series => Topic started by: Petervc on November 25, 2020, 09:45:23 am

Title: Missing Quality in Reporting > Health
Post by: Petervc on November 25, 2020, 09:45:23 am

Hi there

Untill yesterday none of the reportings worked. Today i did a reset RRD Data, reset Netflow Data and repair Netflow Data. To my surprise everything started working but that one thing i really need is gone now.
I wanted to check packet loss but when i click on reporting > Health, i only see packets, system, traffic and vpnusers.

Can you help me?

Thx!

Title: Re: Missing Quality in Reporting > Health
Post by: colordrops on January 16, 2021, 08:49:46 am

Exact same problem, except instead of reseting RRD data, I switched from a KVM install on Ubuntu to a bare metal install on a hardware device.  This was the one feature I needed.  perhaps it doesn't show up until enough data is logged.  I will wait and see...

Title: Re: Missing Quality in Reporting > Health
Post by: Greelan on January 16, 2021, 09:30:51 am

Are your gateways being monitored? Afaik Quality only shows if monitoring is enabled

Title: Re: Missing Quality in Reporting > Health
Post by: colordrops on January 16, 2021, 09:44:13 am

That was it, thanks!  :)

For those who run into this post in the future.  Go to System -> Gateways -> Single, then edit each gateway and uncheck "Disable Gateway Monitoring".