OPNsense Forum

Archive => 15.1 Legacy Series => Topic started by: albegior on March 12, 2015, 04:13:18 pm

Title: OPNSense on compact flash
Post by: albegior on March 12, 2015, 04:13:18 pm

Hello, someone can explain how to build one working OPNSense compact flash?

Title: Re: OPNSense on compact flash
Post by: jstrebel on March 12, 2015, 07:29:53 pm

Instal the CF Flash.
Try to boot the downloaded image either from a external USB or CD.
Then do a normal installation via the instal menu to the CF.
This works I have done it the same way.
Jakob

Title: Re: OPNSense on compact flash
Post by: albegior on March 12, 2015, 09:00:06 pm

Not for me...
I tryed but the install fails on 4 gb compact flash...

Title: Re: OPNSense on compact flash
Post by: jstrebel on March 12, 2015, 09:45:05 pm

Can you give some details. Error messages? etc
Jakob

Title: Re: OPNSense on compact flash
Post by: franco on March 12, 2015, 10:54:11 pm

An error description would be helpful. Ad found out that SD/CF cards may take a long time depending on where they are flashed due to FreeBSD mounting them synchronous as opposed to asynchronous. There's a lot of new things coming to the bsdinstaller, but it'll be two more weeks as this takes quite a bit of work to get right the first time. :)

https://github.com/opnsense/ports/issues/5

Title: Re: OPNSense on compact flash
Post by: albegior on April 06, 2016, 06:26:29 pm

Boot of opnsense fails using NANO on 4GB CF

this is the log form console:

/boot/kernel/kernel text=0x11c3ab8 data=0x786ce8+0x190988 syms=[0x4+0xfa0a0+0x4+0x191209]
Booting...
KDB: debugger backends: ddb
KDB: current backend: ddb

Fatal double fault:
eip = 0xa00
esp = 0xffe
ebp = 0x0
cpuid = 0; apic id = 00
panic: double fault
cpuid = 0
KDB: enter: panic
[ thread pid 0 tid 0 ]
Stopped at      kdb_enter+0x3d: movl    $0,kdb_why
db> panic: doube fault