OPNsense Forum

English Forums => General Discussion => Topic started by: litusbdn on October 03, 2020, 12:17:30 am

Title: VPN Site2Site Opnsense (Server) & PFsense (cliente)
Post by: litusbdn on October 03, 2020, 12:17:30 am

Hello,

I have created a site2site vpn with my OPNsense (server) and a pfsense as client.

I have already mounted in previous occasions point to point vpn with opensense without problems, but as a pfsense client, I manage to raise successfully the vpn (up), but it doesn't pass traffic (ping, rdp etc.)

I have the feeling that the problem may be in the type of compression that is used.... hep tested several, and still does not work, or even does not connect the VPN .

Can someone tell me which option to use in pfsense and opnsense?


Thank you very much.

Title: Re: VPN Site2Site Opnsense (Server) & PFsense (cliente)
Post by: litusbdn on October 03, 2020, 12:18:20 am

Opnsense configuration

Title: Re: VPN Site2Site Opnsense (Server) & PFsense (cliente)
Post by: bartjsmit on October 03, 2020, 10:33:40 am

I had strange errors with a site-to-site OpenVPN link between OPNsense and a RPI4 where ping would work, but NFS mounts would time out and SSH would not connect.

I fixed it by disabling compression on both sides.

Bart...

Title: Re: VPN Site2Site Opnsense (Server) & PFsense (cliente)
Post by: litusbdn on October 03, 2020, 11:06:49 am

Hi, I don't have any answer from the ping.


I tried "no preference" and "disabled" in the opnsense, and the vpn tunnel directly does not connect ....