OPNsense Forum
English Forums => Hardware and Performance => Topic started by: StP on September 10, 2020, 02:27:21 pm
-
I have two Deciso A10 appliances. One with a GX416RA SOC, the other has a GX415GA SOC.
The first one is currently active, the second one should provide some redundancy (cold stand-by).
So I want to export the config of the GX416 and load it into the GX415.
As I already found out I have to rename the network interfaces from igb0 to em0 etc.
Now when testing I can connect to the stand-by machine and I see that its WAN interface is connected to the internet.
But not a single data packet is moving from LAN to WAN and vice versa.
What else do I need to change in the config?