OPNsense Forum

Archive => 15.7 Legacy Series => Topic started by: rjboonstra on December 14, 2015, 12:36:19 am

Title: [SOLVED] Firewall: NAT: Port Forward
Post by: rjboonstra on December 14, 2015, 12:36:19 am

I am struggling with Port Forwarding, specifically with what the Destination Address should be.  On some examples, I have seen it stated to be "WAN Address", but this is not an option.  Regardless, when I have this set up, the computer tied to this port forward is not visible from the outside.  The configuration looks as per the attachment.  Thanks for any insight.  Rudy

   

Title: Re: Firewall: NAT: Port Forward
Post by: smajor on December 14, 2015, 02:31:48 am

Mine looks just like yours, except as you noted from your examples mine uses WAN.

When setting up the NAT, you need to click Advanced and it should be in the list as "WAN Address" I believe.

Title: Re: Firewall: NAT: Port Forward
Post by: franco on December 14, 2015, 07:52:20 am

Can you show us your WAN rule setup?

Title: Re: Firewall: NAT: Port Forward
Post by: rjboonstra on December 14, 2015, 05:35:38 pm

Franco / Smajor... I re-tested this from a different external connection, and it is working just fine. Therefore the simple configuration of Firewall: NAT: Port Forward works perfectly and one needs to test it properly from the outside.  Please consider this issue solved and thanks for your help.  Rudy

Title: Re: Firewall: NAT: Port Forward
Post by: franco on January 09, 2016, 01:30:34 am

Cool, thanks for checking back. :)