OPNsense Forum

Archive => 20.7 Legacy Series => Topic started by: yon on July 23, 2020, 11:35:20 pm

Title: 20.7-r1
Post by: yon on July 23, 2020, 11:35:20 pm

20.7-r1 version has bugs, when i check update and upgrade, then system down and auto reboot. it is can't normal work.

Title: Re: 20.7-r1
Post by: MartB on July 24, 2020, 12:41:02 am

Same here, it tells me its EOL though.

Title: Re: 20.7-r1
Post by: Patrick M. Hausen on July 24, 2020, 07:08:11 am

This is intentional, see this thread:
https://forum.opnsense.org/index.php?topic=18199.msg82605#msg82605

Just don't click on it and your system won't reboot. You can check if you are running the latest version in the dashboard.

Kind regards,
Patrick

Title: Re: 20.7-r1
Post by: franco on July 24, 2020, 07:41:40 am

I'm not sure what to do here: no screenshots; "20.7-r1" does not exist. Vague suggestion that it is actually the development version and no steps to reproduce. ;)


Cheers,
Franco

Title: Re: 20.7-r1
Post by: Patrick M. Hausen on July 24, 2020, 08:01:13 am

They are probably puzzled by this just like me.

And when you click on "Upgrade now" the system will reboot but the message won't go away, so rinse and repeat ...

Room for UX improvement.  ;)

Title: Re: 20.7-r1
Post by: franco on July 24, 2020, 08:12:30 am

I have to disagree. If people use the development version and report defects that are used to develop and test the software it doesn't help that much, especially if the reports are not coherent.

It's super easy to go to the dashboard and copy and paste the version info into a report. It gives a lot of context. "20.7-r1" on the other hand is a typo that gives only a slight indication as to what is going on.


Cheers,
Franco

Title: Re: 20.7-r1
Post by: Patrick M. Hausen on July 24, 2020, 08:24:10 am

I wouldn't argue that those one line "reports" are very helpful  ;)

Title: Re: 20.7-r1
Post by: MartB on July 24, 2020, 12:47:39 pm

Thanks pmhausen, solved :)

@franco It is no typo, besides the -, thats why i deemed 20.7.r1 to be sufficient. Its pretty apparent if you use this release and its good to know its intentional and not a defect.

Its was also small enough and not too inconvenient otherwise that report would have landed in the github issues.

Regards,
MartB

Title: Re: 20.7-r1
Post by: franco on July 24, 2020, 12:57:44 pm

Guys, the versions are either "20.7.r_13" or "20.7.r1" from the dashboard system info. Depending on that version number the report has a different context. Help is impossible until one of those version numbers is actually appearing in this thread with the corresponding supposed oddity in behaviour.


Cheers,
Franco

Title: Re: 20.7-r1
Post by: yeraycito on July 24, 2020, 03:35:56 pm

Updated by System - Firmware -Updates

Title: Re: 20.7-r1
Post by: franco on July 24, 2020, 04:02:29 pm

Ok, now we're talking.

You are currently using the development version. It will keep asking for an upgrade for testing purposes.

To go to the production release:

System: Settings: Firmware -> Settings -> select Production release and save. Use blue box to check for updates, click "update" in blue box... done ;)


Cheers,
Franco

Title: Re: 20.7-r1
Post by: yeraycito on July 24, 2020, 04:50:49 pm

I just put it in to help. In my case I'm already waiting for the final version. Thank you

Title: Re: 20.7-r1
Post by: guyp2k on July 24, 2020, 05:26:07 pm

I assume this is the latest devel version:

OPNsense 20.7.r_13-amd64
FreeBSD 12.1-RELEASE-p7-HBSD
OpenSSL 1.1.1g 21 Apr 2020

Which is newer than 20.7-r1?

When I switch back and forth to production/development and check for upgrade I am prompted with the following:

This software release has reached its designated end of life. The next major release is: 20.7.r1

I know I should have waited until the release, but my curiosity got the best of me :)

Once released I assume I will need to do is switch back to Production releases and perform the upgrade over the RCx and move on?

Thanks

Title: Re: 20.7-r1
Post by: mimugmail on July 25, 2020, 08:02:18 am

Quote from: guyp2k on July 24, 2020, 05:26:07 pm

I assume this is the latest devel version:

OPNsense 20.7.r_13-amd64
FreeBSD 12.1-RELEASE-p7-HBSD
OpenSSL 1.1.1g 21 Apr 2020

Which is newer than 20.7-r1?

When I switch back and forth to production/development and check for upgrade I am prompted with the following:

This software release has reached its designated end of life. The next major release is: 20.7.r1

I know I should have waited until the release, but my curiosity got the best of me :)

Once released I assume I will need to do is switch back to Production releases and perform the upgrade over the RCx and move on?

Thanks

Yes, for now you are on the latest version.

Title: Re: 20.7-r1
Post by: franco on July 25, 2020, 08:16:44 am

The latest development version... it doesn't matter if you switch now to production or wait for 20.7. You still have to switch from development version to production version at some point unless you want to stay on the development version.

Title: Re: 20.7-r1
Post by: yon on July 25, 2020, 10:55:19 am

The system keeps restarting automatically and cannot work at all

Title: Re: 20.7-r1
Post by: mimugmail on July 25, 2020, 11:21:15 am

Are you running Sensei?

Title: Re: 20.7-r1
Post by: yon on July 25, 2020, 01:25:05 pm

Quote from: mimugmail on July 25, 2020, 11:21:15 am

Are you running Sensei?

whats Sensei?  it is new install system. no running other.

Title: Re: 20.7-r1
Post by: yeraycito on July 25, 2020, 02:12:35 pm

If it helps I have active suricata in the wan and sensei in the lan and updated without any problem.

Title: Re: 20.7-r1
Post by: guyp2k on July 25, 2020, 03:26:00 pm

Same here, have Sensei runnin on LAN however, after I upgraded to the RC Sensei packet manager would not start had to do the following:

pkg remove os-sunnyvalley-devel
pkg install os-sunnyvalley-devel
pkg install -f os-sensei

Title: Re: 20.7-r1
Post by: gpb on July 25, 2020, 06:45:24 pm

Just updated, no issues to report.  Headless configuration here...so be aware it does take a good several minutes (didn't time it but seemed like between 5 and 10) for the server to come back online. 

Big thanks to the devs!

EDIT: Did discover I can't route firewall rules to external syslog...not sure though if this is a new problem.  Posted here: https://forum.opnsense.org/index.php?topic=18257.0

Title: Re: 20.7-r1
Post by: XeroX on July 28, 2020, 02:05:08 pm

I had my OPNSense in a reboot loop. Pulled the power cable and then it was booting normal.

However I experience a lot less system load. Was 0.4-0.6 before, now its 0.2-0.3

Title: Re: 20.7-r1
Post by: XeroX on July 28, 2020, 09:18:41 pm

Actually not quite sure, but does IDS now show the stats.log under Log File or is my config f*** up?