OPNsense Forum
Archive => 20.1 Legacy Series => Topic started by: kapara on March 06, 2020, 06:32:50 am
-
I have configured 2 opnsense firewalls.
Is there some kind of rule I need to add or modify to allow location2 to pass traffic across IPSEC to location1?
Location1 can ping LAN at location2 but location 2 cannot ping LAn at location1
Location1: Single WAN with 2 vpn configurations for each remote IP.
IPSECVPN to RemoteWAN1 to location2 is disabled.
IPSECVPN to RemoteWAN2 is up and connected.
I can ping remote lan subnet.
Location2 Dual WAN. WAN1 is down and lWAN2 is up.
Using Gateway Group with both WAN1 and WAN2. LAN default rule is set to GW Group
DNS record is placed above default group to allow DNS as described in documentation.
I am unable to ping devices in Location1 LAN