OPNsense Forum

Archive => 20.1 Legacy Series => Topic started by: keropiko on February 29, 2020, 05:55:21 pm

Title: wan dhcp continuously killing states
Post by: keropiko on February 29, 2020, 05:55:21 pm
Hello,

i have a wan dhcp connection and since i use voip providers i have the option Dynamic state reset    "Reset all states when a dynamic IP address changes" enabled.

Now i have A LOT of disconnections from this options and in the logs i found this:


2020-02-29T18:50:23   opnsense: /usr/local/etc/rc.newwanip: Resyncing OpenVPN instances for interface WAN2.
2020-02-29T18:50:22   opnsense: /usr/local/etc/rc.newwanip: On (IP address: 192.168.182.36) (interface: WAN2[opt4]) (real interface: vtnet5).
2020-02-29T18:42:53   opnsense: /usr/local/etc/rc.newwanip: Resyncing OpenVPN instances for interface WAN2.
2020-02-29T18:42:52   opnsense: /usr/local/etc/rc.newwanip: On (IP address: 192.168.182.36) (interface: WAN2[opt4]) (real interface: vtnet5).
2020-02-29T18:35:23   opnsense: /usr/local/etc/rc.newwanip: Resyncing OpenVPN instances for interface WAN2.
2020-02-29T18:35:22   opnsense: /usr/local/etc/rc.newwanip: On (IP address: 192.168.182.36) (interface: WAN2[opt4]) (real interface: vtnet5).
2020-02-29T18:27:53   opnsense: /usr/local/etc/rc.newwanip: Resyncing OpenVPN instances for interface WAN2.
2020-02-29T18:27:52   opnsense: /usr/local/etc/rc.newwanip: On (IP address: 192.168.182.36) (interface: WAN2[opt4]) (real interface: vtnet5).
2020-02-29T18:20:23   opnsense: /usr/local/etc/rc.newwanip: Resyncing OpenVPN instances for interface WAN2.
2020-02-29T18:20:22   opnsense: /usr/local/etc/rc.newwanip: On (IP address: 192.168.182.36) (interface: WAN2[opt4]) (real interface: vtnet5).
2020-02-29T18:12:53   opnsense: /usr/local/etc/rc.newwanip: Resyncing OpenVPN instances for interface WAN2.
2020-02-29T18:12:52   opnsense: /usr/local/etc/rc.newwanip: On (IP address: 192.168.182.36) (interface: WAN2[opt4]) (real interface: vtnet5).
2020-02-29T18:05:23   opnsense: /usr/local/etc/rc.newwanip: Resyncing OpenVPN instances for interface WAN2.

Is this normal? why is it running so often? can i do something with an option?

thank you in advance