OPNsense Forum
English Forums => General Discussion => Topic started by: neo243 on October 14, 2015, 01:09:53 pm
-
Hi Guys after Updating to the latest release i got this error.
Do i need to worry/fix it or can i ignore it?
FreeBSD 10.1-RELEASE-p19 #0 c982dff(stable/15.7): Wed Sep 9 22:44:49 CEST 2015 root@sensey64:/usr/obj/usr/src/sys/SMP
OPNsense 15.7.16-d1cca7f7e [15.7.12-b34a07b43] LibreSSL 2.2.3 (amd64)
UUID f6ca14d5-71ec-11e5-8a2e-000db93420a0
User Agent Mozilla/5.0 (Windows NT 6.1; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/45.0.2454.101 Safari/537.36
PHP Errors:
[13-Oct-2015 23:29:48 Europe/Berlin] PHP Fatal error: Uncaught exception 'Exception' with message 'Timeout (120) executing :dyndns reload wan' in /usr/local/opnsense/mvc/app/library/OPNsense/Core/Backend.php:100
Stack trace:
#0 /usr/local/etc/inc/legacy_bindings.inc(57): OPNsense\Core\Backend->configdRun('dyndns reload w...', false)
#1 /usr/local/etc/inc/interfaces.inc(3122): configd_run('dyndns reload w...')
#2 /usr/local/www/interfaces.php(697): interface_configure('wan', true)
#3 {main}
thrown in /usr/local/opnsense/mvc/app/library/OPNsense/Core/Backend.php on line 100
dmesg.boot:
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-RELEASE-p19 #0 c982dff(stable/15.7): Wed Sep 9 22:44:49 CEST 2015
root@sensey64:/usr/obj/usr/src/sys/SMP amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x500f20 Family = 0x14 Model = 0x2 Stepping = 0
Features=0x178bfbff
Features2=0x802209
AMD Features=0x2e500800
AMD Features2=0x35ff
TSC: P-state invariant, performance statistics
real memory = 4815060992 (4592 MB)
avail memory = 4075749376 (3886 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 irqs 0-23 on motherboard
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff805f84a0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff805f8550, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff805f8600, 0) error 1
wlan: mac acl policy registered
random: initialized
kbd0 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff80f6e1b0, 0) error 19
cryptosoft0: on motherboard
padlock0: No ACE support.
acpi0: on motherboard
acpi0: Power Button (fixed)
cpu0: on acpi0
cpu1: on acpi0
atrtc0: port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
hpet0: iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
pcib1: irq 16 at device 4.0 on pci0
pci1: on pcib1
re0: port 0x1000-0x10ff mem 0xf7a00000-0xf7a00fff,0xf7900000-0xf7903fff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: on re0
rgephy0: PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 00:0d:b9:34:20:a0
pcib2: irq 17 at device 5.0 on pci0
pci2: on pcib2
re1: port 0x2000-0x20ff mem 0xf7c00000-0xf7c00fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: on re1
rgephy1: PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Ethernet address: 00:0d:b9:34:20:a1
pcib3: irq 18 at device 6.0 on pci0
pci3: on pcib3
re2: port 0x3000-0x30ff mem 0xf7e00000-0xf7e00fff,0xf7d00000-0xf7d03fff irq 18 at device 0.0 on pci3
re2: Using 1 MSI-X message
re2: ASPM disabled
re2: Chip rev. 0x2c000000
re2: MAC rev. 0x00200000
miibus2: on re2
rgephy2: PHY 1 on miibus2
rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re2: Ethernet address: 00:0d:b9:34:20:a2
ahci0: port 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f mem 0xf7f08000-0xf7f083ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
ahcich0: at channel 0 on ahci0
ahcich1: at channel 1 on ahci0
ahcich2: at channel 2 on ahci0
ahcich3: at channel 3 on ahci0
ahcich4: at channel 4 on ahci0
ahcich5: at channel 5 on ahci0
ohci0: mem 0xf7f04000-0xf7f04fff irq 18 at device 18.0 on pci0
usbus0 on ohci0
ehci0: mem 0xf7f08400-0xf7f084ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci1: mem 0xf7f05000-0xf7f05fff irq 18 at device 19.0 on pci0
usbus2 on ohci1
ehci1: mem 0xf7f08500-0xf7f085ff irq 17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
isab0: at device 20.3 on pci0
isa0: on isab0
pcib4: at device 20.4 on pci0
pci4: on pcib4
ohci2: mem 0xf7f06000-0xf7f06fff irq 18 at device 20.5 on pci0
usbus4 on ohci2
pcib5: at device 21.0 on pci0
pci5: on pcib5
ohci3: mem 0xf7f07000-0xf7f07fff at device 22.0 on pci0
usbus5 on ohci3
ehci2: mem 0xf7f08600-0xf7f086ff at device 22.2 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci2
acpi_button0: on acpi0
orm0: at iomem 0xee800-0xeffff on isa0
ppc0: cannot reserve I/O port range
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
acpi_throttle0: on cpu0
acpi_throttle1: on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: at usbus0
uhub0: on usbus0
ugen1.1: at usbus1
uhub1: on usbus1
ugen2.1: at usbus2
uhub2: on usbus2
ugen3.1: at usbus3
uhub3: on usbus3
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen4.1: at usbus4
uhub4: on usbus4
ugen5.1: at usbus5
uhub5: on usbus5
ugen6.1: at usbus6
uhub6: on usbus6
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: ATA-9 SATA 2.x device
ada0: Serial Number 20140521B46264024357
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 30533MB (62533296 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1000020658 Hz quality 800
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub5: 4 ports with 4 removable, self powered
Root mount waiting for: usbus6 usbus3 usbus1
uhub6: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
ugen6.2: at usbus6
umass0: on usbus6
umass0: SCSI over Bulk-Only; quirks = 0x4001
umass0:6:0:-1: Attached to scbus6
Trying to mount root from ufs:/dev/ada0s1a [rw,noatime]...
WARNING: /mnt was not properly dismounted
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: Removable Direct Access SCSI-4 device
da0: Serial Number 058F63666485
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2
WARNING: /mnt was not properly dismounted
Greetings Neo
-
Your dynamic DNS timed out, either due to not being able to connect or a slow server response. Nothing to worry about if your setup keeps working. Double-check whether your dynamic DNS has the right IP though. :)
-
ok thanks :)