OPNsense Forum

Archive => 19.7 Legacy Series => Topic started by: nabz on October 04, 2019, 07:26:41 pm

Title: OPNsense PPTP not working
Post by: nabz on October 04, 2019, 07:26:41 pm

Hi,

My ISP provides me internet link on WAN cable over PPTP. So I get my public IP from PPTP and ISP WAN IP directly from DHCP. Currently I have Tenda router which is in front of OPNSense on WAN Side which acquire this public IP and WAN IP. I tried to use ISP WAN cable directly with Opnsense and bypassed the Tenda router. I get public IP and WAN IP on OPNsense but I cannnot use internet. Trace route just reach to OPNsense and then timeout. Policies and gateway are configured. I searched the logs and found out one constant log.

Under System general logs  kernel: loop detected on pptp1

Regards,

Nabeel

Title: Re: OPNsense PPTP not working
Post by: nabz on October 05, 2019, 09:47:40 am

Well, I reload the OPNsense from previous snapshot and configure the PPTP again now it is working.

Title: Re: OPNsense PPTP not working
Post by: banym on October 05, 2019, 11:42:45 am

Good you got it working. Have fun with you firewall.
Please add a tag like [solved] to the first post of this thread.