OPNsense Forum

Archive => 19.1 Legacy Series => Topic started by: vslav on September 24, 2019, 11:04:35 pm

Title: Could not access another network from OPNSense
Post by: vslav on September 24, 2019, 11:04:35 pm

Maybe someone already faced a similar problem.

I have:
OPNsense with IP 192.168.1.42
Gateway with IP 192.168.1.254
Destination server with IP 192.168.2.2 (in another network)

I need access Destination server (or some other servers in 192.168.2.0/24 network) from OPNSense.
Destination server can be accessed from any server in 192.168.1.0/24 network through Gateway except OPNsense

I've added a separate route to 192.168.2.0/24 network in OPNSense configuration, but it did not help.
Adding a Firewall: NAT: Outbound rule also did not help.

Please someone help to find a solution in this case.

Title: Re: Could not access another network from OPNSense
Post by: banym on September 25, 2019, 08:29:26 am

Can you please draw a little diagram what interfaces are connected where and some screenshots of your rules and interface configuration?

Title: Re: Could not access another network from OPNSense
Post by: vslav on September 26, 2019, 04:26:43 pm

Thanks for your help! I figured it out   ;D
The problem was that I forgot to move this Firewall NAT Outbound rule to the top  :)
Now all is working well!