OPNsense Forum

Archive => 18.7 Legacy Series => Topic started by: Craigst on July 15, 2019, 11:59:33 pm

Title: Multi wan port forward
Post by: Craigst on July 15, 2019, 11:59:33 pm

i just switched over from pfsence , and due to 19.7 installer issues and boot loop i set up 18.7 so far so good but port forwarding is becoming a issue i have tryed a few bits on here and none has worked

i have 2 wan , BT1 and BT2 set up on a load balance gateway then to 1 lan 192.168.10.*

i set my aliases up my unraid server and my cctv server and ports for plex (32400) and blueiris (81)

i used to have bt1 and bt2 go to them ports so regardless of port i used would work to help plex

after port forwarding plex says plex is fully accessible outside my network but in web browser, i have no access typing in ip and port

so what am i missing ? i will be using open vpn for most rather than port forward but plex and blue iris needs port forwarding

Title: Re: Multi wan port forward
Post by: Craigst on July 16, 2019, 12:07:57 am

UPDATE: i just tryed it on my phone on 4g and it worked ? any reason why on my own network i cant use portforwarding?