OPNsense Forum

Archive => 19.7 Legacy Series => Topic started by: nivek1612 on July 10, 2019, 02:35:09 pm

Title: [SOLVED] VLAN interfaces
Post by: nivek1612 on July 10, 2019, 02:35:09 pm
After upgrade to 19.7.rc1 all my VLANs with the exception of the default LAN where inoperable, no access to them and devices on then not able to reach the internet. No obvious error messages i could see.

Quick save of the effected VLAN interfaces from the console resolved the issue. Any logs I can provide that might help ?
Title: Re: VLAN interfaces
Post by: franco on July 10, 2019, 05:47:35 pm
Sounds like https://twitter.com/quybaohoang/status/1148897734859956224

Can you mail me an ifconfig from right after boot and after apply?


Thanks,
Franco
Title: Re: VLAN interfaces
Post by: nivek1612 on July 10, 2019, 05:54:19 pm
I have to admit I didn't save the config right after boot I have the current one obviously which is after the apply

I do have config from a few weeks ago which will not have changed if that helps
Title: Re: VLAN interfaces
Post by: franco on July 10, 2019, 05:55:19 pm
According to the other reporter a reboot is enough to bring back the issue.
Title: Re: VLAN interfaces
Post by: nivek1612 on July 10, 2019, 05:57:08 pm
ok rebooting now
Title: Re: VLAN interfaces
Post by: nivek1612 on July 10, 2019, 06:04:06 pm
Yep that did it sending the two config files now to you email add
Title: Re: VLAN interfaces
Post by: franco on July 11, 2019, 09:37:08 am
So we would call this "a series of unfortunate events" for WAN dailup interfaces in particular which made this hard to catch. ;)

https://github.com/opnsense/core/commit/6ae356678

# opnsense-patch 6ae356678


Cheers,
Franco
Title: Re: VLAN interfaces
Post by: nivek1612 on July 11, 2019, 09:54:59 am
That fixed the VLAN issue thanks Franco

Interestingly flowd_aggregate   Insight Aggregator will no longer start at boot. Is this connected ?

trying to start from the GUI I see the following in log but still doesn't start

Jul 11 08:54:34   /flowd_aggregate.py: startup, check database.

I reset the netflow data and all is good again



Title: Re: [SOLVED] VLAN interfaces
Post by: franco on July 11, 2019, 10:06:28 am
Thanks for confirming  8)

There may be an incompatibility in database layout while the flowd aggregator went from upstream code in compiled code for Python 2.7 (which not only needed replacement for Python 2 EoL but also gave us other behind-the-scenes trouble) to our own new Python-based code for Python 3. I would say the best way is to reset the database indeed.

A similar issue exists with Squid 3 -> Squid 4 transition with its SSL cache database.


Cheers,
Franco