OPNsense Forum

Archive => 19.1 Legacy Series => Topic started by: matzeeg3 on June 20, 2019, 08:18:38 pm

Title: Outbound Nat
Post by: matzeeg3 on June 20, 2019, 08:18:38 pm

Hi everybody,

I have maybe a simple Problem. I have a public IP and I want to portforward one port to an IP witch is lockeded behind a VPN. At the destination I see the traffic. Because I can't set the default route and I don't want to I like to hat it on the opnsense. So now I set up everything but it did not work I try it with ipsec interface wan interface and with the route based vpn interface. So can anybody help me? Can somebody tell me where I can see the traffic flow?
I hope someone can help me.

Thanks a lot.

Sincerely
Matze

Title: Re: Outbound Nat
Post by: manjeet on June 21, 2019, 09:03:31 am

Hi @matzeeg3, you scenario is litter confusing. I might be able to provide some solution if i understand it better

Scenario1: Intertnet with static IP -> opnsense -> opns network -> second router with VPN -> second network with receiving system

Scenario 2: source network & router -> internet with static IP -> opnsense with VPN -> opns network with receiving system

Scenario 3: Internet with static IP -> opnsense with vpn -> opnsense network
                                                                                                    -> vpn network with receiving system

Or any other please specify.

Title: Re: Outbound Nat
Post by: matzeeg3 on June 21, 2019, 10:41:51 am

i think the best way to descripe is with a picture

Title: Re: Outbound Nat
Post by: matzeeg3 on June 24, 2019, 04:56:48 pm

can no one help me? no one an idear?