OPNsense Forum
Archive => 19.1 Legacy Series => Topic started by: vikozo on May 16, 2019, 07:18:58 am
-
Hello
i followed the Installation there - Basicly it is not much to do.
But the login is not showing any thing.
would be nice to know if the Client connect to the FreeRadius
or would be nice to know if the User is not valid to login.
in my case the Log is empty.
any help or idea to fix it?
have a nice day
vinc
-
Go to console, type "service radiusd stop" and then "radiusd -X". This will start radius in debug mode.
-
@mimugmail
merci for your feedback,
May 16 17:15:35 radiusd[28449]: (3) Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject): [10:d3:8a:fa:d5:bb/10:d3:8a:fa:d5:bb] (from client AP01-unifi port 0 cli 10-D3-8A-FA-D5-BB)
it looks like the client is connecting but the user make problem!
the EAP-Methode should be what? TTLS PEAP
-
when you want to use it for wireless connections, PEAP with MSCHAPv2 works with Linux clients.
-
User authenticates with MAC address, this is 801.X for wired ..