OPNsense Forum

English Forums => Hardware and Performance => Topic started by: buggy09 on April 16, 2019, 08:48:18 pm

Title: High WCPU for [intr{swi4: clock (0)}]
Post by: buggy09 on April 16, 2019, 08:48:18 pm

OpnSense is installed on SuperMicro SuperServer 5018D-FN8T with Xeon D-1518 CPU.
Everything works fine, but even in idle, [intr{swi4: clock (0)}] shows WCPU abt 10.0% all the time.

Code: [Select]

PID USERNAME PRI NICE SIZE  RES    STATE   C    TIME      WCPU     COMMAND
11   root    155 ki31 0   128K   CPU0    0 330.2H    100.00%  [idle{idle: cpu0}]
12   root    -60  - 0   1328K  WAIT    5 35.3H      10.57%  [intr{swi4: clock (0)}]

Same config on chinese Mini PC based on Celeron J1900 shows WCPU for same process less then 1%.

Is it normal ? Load average showing on Dashboard is about 0.5 (8 cores CPU).