OPNsense Forum
Archive => 19.1 Legacy Series => Topic started by: steveo98501 on April 08, 2019, 12:12:01 am
-
So I have never set up OPNsense before but have set up PF sense. Any rate burining the inflated image file:
OPNsense-19.1.4-OpenSSL-vga-amd64.img to an 8 GB USB stick and installing on a Firewall Micro Appliance with 4X Intel Gigabit Ports, Intel Atom E3845, AES-NI by Protectli, results in the following.
Free BSD starts to boot, get to the menu, don't press anything and it continues to load showing several /boot/kernel/... lines.
After about 100 or so of these lines with different info we get to:
/boot/kernel/ng_vlan.ko size 0x2ee0 at 0x2585000
Booting...
/
That is where things hang. The cursor is blinking under a frozen spinny on the last line represented by the "/". Booting... is shown with a blue background. And things are stuck.
I get similar behavior on an old desktop which used to run windows. I have tried every flavor of this software and all freeze some earlier some later. But none of them install on any of the 3 very different platforms I have tried.
-
Same here. Have spent days trying to get it to work. See https://forum.opnsense.org/index.php?topic=12342.0
-
It means the console option presented by the HW/BIOS is not currently enabled in the image. The boot likely continues fine. This seems to be an UEFI thing...
Cheers,
Franco