OPNsense Forum

English Forums => General Discussion => Topic started by: Mago on March 25, 2019, 02:33:49 pm

Title: Nat Port forwarding Associated filter rule problem
Post by: Mago on March 25, 2019, 02:33:49 pm

I just got the last release of Opensense and configured it whit one of my public ip( the ISP gave me a public subnet whit 5 ip 63.xx.xx.64/29)
as WAN ip,and i created 1 virtual ip alias for each free ip i have,on the LAN side i configured the class 192.168.0/24,now i can access interent whitout any problem and and seems to work fine,
if i try to create a rdp port forwarding from the wan ip,(or any other of the virtual ip address that i have,changing the destination to the specific wan virtual address)
to an internal ip on the lan it work only if i set "pass" to the filter rule association parameter, if i leave "add associated filter rule" i cant reach the address on the lan,it seems like Opensense cant create the rule properly, anyway if i go to
 Firewall>Rule i can see the rule created " pass any 3389 to 192.168.1.xx" but it dosent work , anyone have experienced this kind of problem before?

Title: Re: Nat Port forwarding Associated filter rule problem
Post by: swILeZBa on September 29, 2021, 10:59:14 pm

Hi Mago,

Stumbled upon your post. I also have the same problem, did you ever find the solution?
I think that I found the solution here (https://forum.opnsense.org/index.php?topic=6320.msg26844#msg26844). If this fixes your problem also you can mark this as solved.

Cheers

Edit: Sorry for the necrobump. Delete my post if you think this is unnecessary. Just trying to close some loops.