OPNsense Forum

Archive => 19.1 Legacy Series => Topic started by: cake on February 03, 2019, 08:55:23 am

Title: problem updating
Post by: cake on February 03, 2019, 08:55:23 am

Just reporting I had to revert back to 18.7 from 19.1

Not sure where the problem was. My setup is DNSCrypt on 127.0.0.2:53, unbound listen on #53 and

Code: [Select]

do-not-query-localhost: no

      forward-zone:
        name: "."
        forward-addr: 127.0.0.2@53
system dns setting is just 127.0.0.2

For firewall rules I have NAT Port Forward--> "LAN2    TCP/UDP    *    *    ! LAN2 address    53 (DNS)    127.0.0.2    53 (DNS)    DNS (KEEP AT TOP) " for all 3 interfaces.

Also I have for Virtual IP --> "127.0.0.2/32    Loopback    IP Alias    DNSCrypt "

This worked well on 18.7 , forcing every clients to use dnscrypt.
On 19.1 the GUI was locking up a little and it seems unbound was not getting reply from dnscrypt. dnscrypt log said it was listening where it should and could communicate upstream. All services were running. Maybe someone else has the same issues?

Title: Re: problem updating
Post by: Northguy on February 03, 2019, 09:59:14 am

Hi, Try to see if this issue applies to your situation:

https://forum.opnsense.org/index.php?topic=11401.15