OPNsense Forum
Archive => 18.7 Legacy Series => Topic started by: sol on January 08, 2019, 06:50:40 pm
-
Hi there,
with the recent update ntopng wants a data migration
https://www.ntop.org/support/faq/migrate-the-data-directory-in-ntopng/ (https://www.ntop.org/support/faq/migrate-the-data-directory-in-ntopng/)
How can this guide from ntop be used the change the settings on opnsense via console / ssh?
Thank you.
-
I wouldn't recommend it.
You can login via SSH and execute the commands like in the blog post, but this is only relevant when your ntop instance is worldwide accessible ..
-
So I can just ignore the notice in ntopng and it will keep working like before?
-
Thats what the author writes in your link
-
I'm receiving this warning also after the last update including an updated NTOPNG.
Its annoying as I cannot find a way to remove the warning message?
Currently it is quite an obvious pink banner across the top of 'every' window within NTOPNG.
This is a home setup so I'm not overly impacted by it
I have tried following the article without any change to the warning message.
-
The warning message is from FreeBSD ports. We do not intend to change it.
Cheers,
Franco
-
Found a fix but it does not survive an OPNsense reboot
Stop the ntopng Service through the OPNsense GUI
Move contents of ntopng data directory to new location
# mv /var/tmp/ntopng/* /var/db/ntopng/
Apply the correct access to the new directory
# chown -R ntopng:ntopng /var/db/ntopng
Apply this notpng CLI command which points ntopng to the new data directory
# ntopng --data-dir /var/db/ntopng
Start ntopng service through the OPNsense GUI
Have tried applying the ntopng CLI command for updating the data directory
--data-dir=/var/db/ntopng
To the file
/usr/local/etc/ntopng.conf
This works but does not survive a reboot of OPNsense.
There is another instance of the config file located at
/usr/local/opnsense/service/templates/OPNsense/Ntopng/ntopng.conf
But I have not attempted to update this file as I am not sure which location of the config to correctly update.
-
Is there a recommended way to get the message to go away? My OCD can't handle a red banner there forever...
-
I'll so this next week ...
-
Awesome. Thanks!
-
That would be great! Thanks
-
I added a fix .. will be in 19.1.2 or .3 ...
-
19.1.2
-
:-*