OPNsense Forum
English Forums => Hardware and Performance => Topic started by: SovereignMan on December 22, 2018, 06:51:23 pm
-
I bought the pfSense SG-1000 after searching for a long time before deciding on pfSense. All reports were glowing.
I got the firewall specifically for throttling xbox and scheduling. All I can say is FAIL.
https://forum.netgate.com/topic/69331/scheduled-blocks-won-t-work-without-manual-states-reset/66 (https://forum.netgate.com/topic/69331/scheduled-blocks-won-t-work-without-manual-states-reset/66)
https://forum.netgate.com/topic/134145/blocking-scheduling-not-quite-working/16 (https://forum.netgate.com/topic/134145/blocking-scheduling-not-quite-working/16)
The result for me is many many lost hours and a firewall that doesn't firewall.
My questions are does this work properly in OPNSense and can I install it on the SG-1000 to replace pfSense?
If I can't get this working I'm going to get a USG: https://www.ubnt.com/unifi-routing/usg/ (https://www.ubnt.com/unifi-routing/usg/)
Let me know your thoughts.
Many Thanks
-
SG 1000 is ARM based, so it wont work with OPNsense for now ... Sorry