OPNsense Forum

English Forums => Hardware and Performance => Topic started by: Xames81 on December 12, 2018, 01:10:04 pm

Title: FREEBSD Slow
Post by: Xames81 on December 12, 2018, 01:10:04 pm
I see that connections are so slow, many people say that the FREEBSD systems are slow, is that true?
Title: Re: FREEBSD Slow
Post by: mimugmail on December 12, 2018, 01:24:49 pm
No
Title: Re: FREEBSD Slow
Post by: franco on December 12, 2018, 04:30:50 pm
I'd say it depends. Fragmentation is a speed killer when not addressed. Checksumming can be, too. Switches and cables even.

There are a lot of variables, but as Michael was trying to point out: it's not possible to generalise.


Cheers,
Franco
Title: Re: FREEBSD Slow
Post by: juliocbc on December 12, 2018, 05:51:06 pm
Here is a interesting reading about it:

https://github.com/ocochard/netbenches

ref.: https://forum.opnsense.org/index.php?topic=10356.msg47699#msg47699

Another good reference is: https://calomel.org/

Some piece of metal, like some cards from Tilera and others vendors, with a good driver implementation can do a good work.

Intel's DPDK can get the job done, but will require some hard work to put all together and get the heavy dutty work done!



Title: Re: FREEBSD Slow
Post by: tillsense on December 12, 2018, 07:43:31 pm
Hi,

........many people say that the FREEBSD systems are slow.....

completely nonsense.   ::)

cheers till
Title: Re: FREEBSD Slow
Post by: Xames81 on December 13, 2018, 01:57:28 pm
Ok what exactly tilera works with opnsense? I buy it to prove.
Title: Re: FREEBSD Slow
Post by: mimugmail on December 13, 2018, 02:16:36 pm
I tested with Chelsio T580 cards and received 22Gbit without tuning :)
Title: Re: FREEBSD Slow
Post by: juliocbc on December 13, 2018, 07:12:32 pm
I tested with Chelsio T580 cards and received 22Gbit without tuning :)

Awesome!! With pf enabled or only with network forwarding?

Title: Re: FREEBSD Slow
Post by: mimugmail on December 13, 2018, 08:04:51 pm
Pf enabled without Nat.
Title: Re: FREEBSD Slow
Post by: juliocbc on December 13, 2018, 10:03:42 pm
Terrific!!